Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£6.99Visit shop Hycote Zinc Primer Double Acrylic Spray Paint 150Ml
Visit shop5 offers from £6.99 - £12.99
View price history by clicking the chart icon.
This Hycote Double Acrylic Zinc Spray Primer is designed for DIY enthusiasts and professional users needing a durable, high-coverage primer for various surfaces. Its key benefit is the compressed aerosol technology, offering double the coverage of standard aerosols, leading to efficient use and a tough, hard-wearing finish. A minor consideration is its specific application as a primer, meaning it's intended for use before topcoats.
| Colour | Silver |
|---|---|
| Model Part Number | XDPB911 |
| Brand | Hycote |
| Container Volume | 150ml |
The primary benefit is its compressed aerosol technology, which provides double the coverage of standard aerosols, meaning more paint and less propellant per can for efficient application.
Yes, this primer is compatible with plastics. However, for optimal adhesion on certain plastics, it is recommended to test in an inconspicuous area or use a specific plastic primer first.
The drying time can vary depending on conditions, but it is designed to be fast-drying. For a touch-dry finish, allow approximately 10-15 minutes. Full curing will take longer and allow for subsequent paint layers.
This primer is compatible with acrylic and cellulosic finishes, as well as OEM finishes, providing a versatile base for your chosen topcoat.
After use, invert the can and spray for a few seconds to clear the nozzle. Store the can in a cool, dry place, away from direct sunlight and heat, and ensure it is out of reach of children.
It can be used on metals, plastics, wood, and ceramics.
Yes, the paint has excellent resistance to sunlight and fading, making it suitable for exterior applications when properly topcoated.
Ensure the can is shaken sufficiently for at least two minutes before and during use. Check that the nozzle is not blocked; if so, clean it by inverting the can and spraying briefly, or use a solvent on a cloth to clean the nozzle tip.
Verify that the surface was properly cleaned and degreased before application. Ensure any previous coatings were suitable or removed. Lightly abrading the surface can improve adhesion.
Ensure application in a well-ventilated area with appropriate temperature and humidity levels. Avoid applying too thickly, as this can prolong drying times. Ensure the surface is free from contaminants that might interfere with drying.
Immediately after use, invert the can and spray for 1-2 seconds to clear the nozzle. If clogged, soak the nozzle in a compatible solvent (like cellulose thinners) and try again. Replace the nozzle if damage occurs.
Setup:
Compatibility:
This primer is compatible with:
Care:
