Trend KWJ950/PRO Worktop Jig - 950mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Trend KWJ950/PRO 950mm Worktop Jig is designed for professional carpenters and kitchen fitters who need to create precise mitre joints in various worktop materials like laminated timber and compact laminate. Its key benefit is the ability to achieve accurate, repeatable joints efficiently, even on out-of-square surfaces. A potential caveat is the requirement for specific router accessories like a 30mm guide bush and a 1/2-inch plunge router, which are not included. This jig simplifies creating complex joints, including straight cuts, angled trims, and even recesses for fittings.
All features
| Model Part Number | KWJ950/PRO |
|---|---|
| Brand | Trend |
Extended Product Information
FAQs
What size router is recommended for this jig?
A 1/2-inch plunge router is required. The specific size of the router's motor (e.g., amperage or wattage) will affect cutting speed and efficiency, but the 1/2-inch collet size is essential for compatibility with the recommended cutter.
Does the jig come with a router cutter?
No, the jig package includes one Trend BR01 BR01X1/2TC 50mm 1/2" Router Kitchen Fitters Worktop Cutter, which is suitable for general-purpose trimming and mortising with the jig. However, you will need your own 1/2-inch plunge router.
Can this jig be used on solid wood worktops?
The jig is primarily designed for laminated timber, compact laminate, and similar composite surfaces. While it may be used on solid wood, results might vary, and it is best suited for veneered or laminated edges common in kitchen worktops.
How do I create a joint for a non-standard worktop width?
The jig features indexed backsets for various worktop widths. For non-standard widths, you may need to use the direct positioning features and carefully measure and mark the male cut line on the worktop before aligning the jig.
What is the maximum worktop width this jig can handle for mitre joints?
The jig itself is 950mm long, indicating it is designed for worktops up to this width. The effective width you can join will depend on the router's plunge depth and the cutter length.
Can I create 45-degree joints with this jig?
Yes, the jig is designed to create various corner radii including R100mm, R40mm, and 45° cuts, in addition to 90° straight cuts.
Troubleshooting
Router cutter not reaching the correct depth.
Verify the plunge depth setting on your router and ensure the router base is correctly seated against the jig's guide surfaces.
Joint is not tight or misaligned.
Double-check the jig's positioning on the worktop, ensure it's securely clamped, and confirm the male cut line is accurately aligned with the jig's guides.
Guide bush is difficult to fit or move.
Ensure the guide bush and the router's template guide collar are clean and free from debris. Check that the correct size guide bush is being used.
Jig slides during routing.
Increase the clamping pressure or add additional clamps to secure the jig firmly to the worktop. Ensure the worktop surface is free of dust which can reduce friction.
Pros and Cons
Pros
- Enables precise and repeatable mitre joints on various worktop materials.
- Accommodates non-standard and out-of-square worktop edges effectively.
- Includes pre-set recesses for connector bolts, taps, and hinges, saving time.
- Versatile with options for different insets, radii, and straight cuts.
- Designed for quick and easy creation of square-edged and bullnose joints.
Cons
- Requires specific router accessories (guide bush, cutter, router) which are not included.
- Learning curve for optimal use on complex or non-standard joints.
- 7.4 kg weight may require stable work surface and careful handling.
- Primarily designed for routing, not for manual cutting or joining.
Setup, Compatibility & Care
Setup:
- Ensure the worktop is securely clamped to a stable surface.
- Position the Trend KWJ950/PRO jig onto the worktop, aligning with the intended cut lines.
- Utilize the front edge alignment and direct positioning features for accuracy.
- Insert the required Trend BR01 BR01X1/2TC cutter and 30mm guide bush into your 1/2-inch plunge router.
- Make the necessary router passes to create the joint and any required recesses.
Compatibility:
- Required: 30mm guide bush, 12.7mm (1/2 inch) diameter x 50mm length router cutter, 1/2-inch plunge router, F-clamps with minimum 80mm throat.
- Worktops: Laminated timber, compact laminate, and similar composite materials.
Care:
- Clean the jig after each use with a dry or slightly damp cloth to remove dust and debris.
- Store in a dry place to prevent corrosion.
- Periodically check for any damage to the jig's edges or guide surfaces.