Liberon Gilt Cream Compiegne 30ml - brand:Liberon, mpn:126824

Liberon Gilt Cream is primarily designed for wood, plaster, and previously gilded or primed surfaces. While it may adhere to some primed metal surfaces, testing in an inconspicuous area is recommended first.

Drying time varies depending on application thickness and environmental conditions (temperature, humidity). Generally, it is touch-dry within 30-60 minutes and can be handled with care after a few hours. Full curing may take 24 hours.

Yes, once fully dry, you can apply a suitable clear varnish or lacquer to protect the gilt finish. Ensure the varnish is compatible with solvent-based finishes.

Clean brushes and cloths immediately after use with white spirit, followed by washing with warm, soapy water.

Liberon Gilt Cream is best suited for interior projects. For exterior applications, a more robust, weather-resistant finish would be recommended.

For most applications, one good, even coat is sufficient. If a deeper color or more opaque finish is desired, a second thin coat can be applied after the first has dried.

Ensure the surface is properly prepared and that you are applying thin, even coats. For larger areas, use a soft brush or cotton cloth and work in a consistent direction. Allow adequate drying time between coats if applying multiple layers.

The cream may have been exposed to air for too long or stored improperly. Try adding a tiny drop of Liberon Gilt Cream revitalizer or a compatible solvent to the pot and mixing thoroughly. Ensure the lid is sealed tightly after use.

The surface may not have been properly prepared. Ensure it was clean, dry, and free of contaminants. For porous surfaces, a primer or sealer may have been necessary. Ensure the gilding cream was fully dried before handling.