Diversey Bourne Traffic Liquid Wax - 5L

No, this product is specifically formulated for sealed surfaces. Applying it to unsealed wood may result in absorption issues or floor damage.

Typically, two thin coats are sufficient for a durable, high-gloss finish. Allow the first coat to dry completely before applying the second.

When applied according to instructions in thin, even layers, it creates a safe surface, but care should always be taken on freshly waxed floors.

Use a clean mop or a professional floor applicator to spread the wax evenly across the surface.

Yes, for the best results and proper adhesion, existing old wax layers should be removed using a floor stripper.

Drying time depends on humidity and temperature, but it generally takes 30-60 minutes to dry to the touch between coats.

Usually caused by applying the wax too thick or using a dirty mop. Ensure thin, even coats and use clean equipment.

The floor was likely not cleaned properly or residue from a cleaner remains. Ensure the surface is stripped and neutralized before application.