Best current price£101.95from Butler Technik
Shopping.co.uk recommended and popular offers
Butler Technik£101.95Visit shop Victron Converter Isolated Dc Dc Orion 12/12-18A Galvanic Isolation
Visit shop1 offer from £101.95
View price history by clicking the chart icon.
This guide is for users of the Victron Energy Orion-Tr DC-DC Converter, designed for efficiently converting 12V DC power in various applications. The Orion-Tr provides a reliable 18A output, making it ideal for charging batteries and powering devices in mobile and off-grid setups. A key point to note is the derating of output at higher temperatures; ensure adequate ventilation in warm environments.
| Model Part Number | Orion-Tr |
|---|---|
| Brand | Victron Energy |
Galvanic isolation means there is no direct electrical connection between the input and output circuits, providing safety and preventing ground loops.
Yes, the Orion-Tr is compatible with lithium batteries. Ensure the output voltage is set correctly for the charging profile of your lithium battery.
Connect the input terminals of all units to the same 12V source, and connect the output terminals of all units to the load or battery. Ensure all connections are secure and use appropriately sized wiring.
The remote on-off function allows you to switch the converter on and off remotely, which can be useful for integrating it into a larger power management system.
The unit has built-in protection against overheating. If the temperature exceeds safe levels, the output will be reduced or the unit will shut down to prevent damage. Ensure proper ventilation.
IP43 indicates the level of protection against solid objects and water. The '3' means that the unit is protected against spraying water. This rating is achieved when the unit is installed with the screw terminals facing downwards.
Check the input voltage and the remote on-off connection. Ensure the input voltage is within the specified range and that the remote on-off signal is correct if used.
Verify the input voltage. Check the output voltage setting. Ensure that the unit is not operating at a temperature above 40°C, as the output is derated above this temperature.
Ensure adequate ventilation. Reduce the load if the unit is operating near its maximum capacity. Check for any short circuits on the output side.
Check for overloads or short circuits. Reduce the load or replace the unit if the issue persists.
Setup:
Compatibility:
Care:
