Hozelock Pro Metal Garden Hose Pipe Repair Connector - 5 x 1/2" 12.5mm

This connector is specifically designed for 1/2 inch (12.5mm) garden hose pipes.

While it is designed to join two lengths of the same size hose, compatibility with different hose materials or wall thicknesses may vary. Best results are achieved with standard 1/2" (12.5mm) hoses.

The connector is made from durable metal and comes with a 3-year guarantee, suggesting it is built for longevity under normal garden use.

The connector is designed for standard garden hose pressure. For very high-pressure applications, it's advisable to check specific pressure ratings if available or consult the manufacturer.

This connector is designed for a permanent connection. While it might be possible to remove the hose with significant effort, it is intended for repairs or joining hoses where a lasting connection is desired.

Ensure the hose is inserted fully and that the hose end is clean and undamaged. Check that the hose is the correct diameter. If the hose is old and stiff, try softening the end in warm water. Ensure any retaining clips or screws are properly tightened.

Ensure the hose is pushed fully into the connector, right up to the internal stop. Check for any debris or obstructions in the hose end or connector. If the hose is old or stiff, it may be difficult to get a tight fit; consider warming the hose end slightly in warm water (not hot) to make it more pliable. Ensure any securing clamps or collars are tightened correctly.

Make sure you are using the correct size hose (1/2" or 12.5mm). If the hose is new or rigid, try warming the end in warm water for a minute to soften it. Ensure the end of the hose is cut cleanly and squarely.

Verify that the hose is the correct diameter for the connector. Ensure the hose is pushed all the way into the connector body. If the connector has a screw mechanism or clamp, ensure it is tightened securely around the hose.