Best current price£10.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.95Visit shop B&Q - Inline Pond Or Garden Barbed Hose Joiner 32mm X 32mm (1.25 Inch) With 2X Hose Clips
Visit shop2 offers from £10.95
View price history by clicking the chart icon.
The Pisces Inline Pond or Garden Barbed Hose Joiner is an essential solution for pond owners and gardeners needing to securely connect two 32mm hoses to extend their irrigation or filtration runs. Designed for durability and consistent water flow, this component provides a robust, leak-resistant seal through its barbed construction and included heavy-duty wire clips. While it is perfect for permanent or semi-permanent setups, it is important to note that this jointer is specifically sized for 32mm internal diameter hoses and will not accommodate variations in pipe gauge.
| Brand | Pisces |
|---|
This connector is designed for 32mm internal diameter hoses, which are typically used for pond pumps or large irrigation setups, rather than standard garden hoses.
Yes, the provided double wire hose clips can be loosened and reused if you need to adjust or remove your setup.
This is intended for low-to-medium pressure pond and garden irrigation systems; it is not recommended for high-pressure plumbing applications.
The installation is straightforward: slide the clips on, push the hose over the barbs, and tighten the clips.
The joiner is constructed from high-quality, UV-stabilized plastic suitable for long-term outdoor immersion.
Ensure the wire clips are positioned directly over the barbed portion of the joiner and tighten them firmly.
Verify that the hose internal diameter is exactly 32mm and that the hose is pushed fully past the barbs to the center stop.
Soak the end of the hose in warm water for a few minutes to soften the material, making it more pliable.
To install, first slide the two included wire clips onto the ends of your hose sections. Push the hose firmly over the barbs until it seats against the center stop of the joiner. Position the wire clips directly over the barbed area and tighten them evenly until the hose is firmly gripped.
