Stop Cock Copper x Poly 22mm x 25mm Plumbright
Best current price£14.21from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£14.21Visit shop WRAS Stop Cock Copper x Poly 22mm x 25mm EN1213
Visit shopTravis Perkins£14.21Visit shop One Offer
1 offer from £14.21
View price history by clicking the chart icon.
Product Information
Full details
This guide is for users of the Plumbright Stop Cock Copper x Poly 22mm x 25mm, a robust system designed for outdoor and underground cold water applications. It simplifies water system installations with its compression ends and WRAS approval. Keep in mind that while it's easy to use, proper installation according to the manufacturer's instructions is crucial for optimal performance and to avoid leaks.
All features
| Brand | Plumbright |
|---|
Extended Product Information
FAQs
What is WRAS approval?
WRAS (Water Regulations Advisory Scheme) approval confirms that the product complies with UK water regulations and is safe for use with potable water.
Can I use this stop cock with hot water?
No, this stop cock is designed for cold water applications only.
What type of pipe is compatible?
It is compatible with 22mm copper pipe and 25mm poly pipe.
What tools do I need for installation?
You'll need a pipe cutter, deburring tool, and a wrench for tightening the compression fittings.
How do I prevent leaks?
Ensure the compression fittings are tightened correctly, and the olives are in good condition. Regularly inspect for leaks.
Can this be used underground?
Yes, it is suitable for underground cold water systems.
What should I do if the stop cock freezes?
Insulate the stop cock to prevent freezing. If freezing is likely, drain the system to avoid damage.
Troubleshooting
Leakage at the compression fitting.
Tighten the nut further, ensuring the olive is properly seated. If the leak persists, replace the olive and retighten.
Difficulty in tightening the nut.
Ensure the pipe is straight and properly inserted. Lubricate the threads if necessary. Use the correct size wrench.
Low water flow.
Check for any obstructions or debris in the stop cock. Ensure the valve is fully open.
Pros and Cons
Pros
- Easy installation with compression fittings.
- Durable construction for long-term use.
- WRAS approved, ensuring safety and compliance.
- Suitable for both outdoor and underground applications.
- Reliable performance in cold water systems.
Cons
- Requires proper installation to prevent leaks.
- May require specific tools for tightening compression fittings.
- Not suitable for hot water systems.
- Limited to cold water applications only.
- Specific size limitations (22mm x 25mm).
Setup, Compatibility & Care
- Preparation: Ensure the water supply is turned off and the system is depressurized. Gather the necessary tools: pipe cutter, deburring tool, and a wrench for tightening the compression fittings.
- Cutting the Pipe: Cut the pipe squarely using a pipe cutter. Deburr the pipe ends to remove any sharp edges.
- Connecting the Fittings: Slide the nut and olive onto the pipe. Insert the pipe into the stop cock body. Tighten the nut with a wrench until secure, but do not overtighten.
- Compatibility: Compatible with 22mm copper pipe and 25mm poly pipe. Ensure all components are WRAS approved.
- Care: Regularly inspect for leaks. If a leak is detected, tighten the compression fitting or replace the olive. Protect from freezing during winter by insulating or draining the system.