3D Tank Protection for Kawasaki Motorcycle - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 3D polyurethane resin sticker is designed for Kawasaki motorcycle owners looking to protect their fuel tank from everyday abrasions and scratches. Its key benefit is providing durable, efficient protection while enhancing the bike's aesthetics. A potential caveat is ensuring correct application for long-term adhesion. This product features a special 3D resin coating and a robust acrylic base for lasting durability.
All features
| Model Part Number | 18087 |
|---|---|
| Brand | Quattroerre |
Extended Product Information
FAQs
What are the exact dimensions of the sticker?
The dimensions of the sticker are 19 x 13 cm.
Is this sticker specific to one Kawasaki model?
While designed with Kawasaki motorcycles in mind, it may fit other bikes if the tank dimensions are compatible. Always measure your tank.
How long does the adhesive last?
The sticker is realized with an acrylic base designed to last over time, but longevity can be affected by environmental factors and maintenance.
Can I remove the sticker without damaging the paint?
Yes, if removed carefully. Gently heating the sticker with a hairdryer and peeling slowly is recommended to minimize the risk of paint damage.
What material is the protective coating made of?
The protective coating is made of a special 3D polyurethane resin.
Does the sticker offer protection against heavy impacts?
The sticker is designed to protect against abrasions and scratches from everyday use, not heavy impacts.
How should I clean the sticker?
Clean the sticker using a soft, damp cloth. Avoid harsh chemicals or abrasive materials.
Troubleshooting
Sticker not adhering well
Ensure the tank surface was perfectly clean and dry before application. Re-apply heat gently to reactivate the adhesive and press firmly.
Air bubbles under the sticker
Try to push small bubbles towards the edge with a soft cloth. For larger bubbles, you may need to carefully lift the edge, release the air, and reapply pressure.
Residue left after removal
Gently heat the remaining adhesive with a hairdryer and use a dedicated adhesive remover or isopropyl alcohol on a soft cloth to clean the area.
Pros and Cons
Pros
- Offers excellent protection against scratches and abrasions.
- Enhances the visual appeal of the motorcycle.
- Made with durable, high-quality materials for longevity.
- Easy to apply for a secure and lasting fit.
- Specifically designed for motorcycle fuel tanks.
Cons
- Requires careful application to avoid bubbles or misalignment.
- May not fit all Kawasaki models perfectly due to variations.
- Removal might leave adhesive residue if not done carefully.
- Limited color options available (only black mentioned).
Setup, Compatibility & Care
Setup:
- Clean the Tank: Ensure the fuel tank surface is thoroughly cleaned and dried. Remove any dirt, wax, or polish.
- Position the Sticker: Carefully align the sticker on the tank. It is recommended to test the placement before removing the backing.
- Apply Slowly: Peel back a small section of the adhesive backing and begin applying the sticker from one edge, smoothing it down with firm pressure to prevent air bubbles.
- Smooth Out Bubbles: If small bubbles appear, you can often push them towards the edges with a soft cloth.
Compatibility:
- Designed primarily for Kawasaki motorcycles, but may fit other models with similar tank dimensions. Always check the product dimensions (19 x 13 cm) against your tank.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners or high-pressure washing directly on the sticker.
- If removal is necessary, gently heat the sticker with a hairdryer on a low setting and peel slowly. Clean any residue with an appropriate adhesive remover.