Tetrion Powerfil 2K Filler - 600g

The filler sets in minutes, meaning you have a very short working time, typically around 5-10 minutes depending on ambient temperature and humidity. Mix only the amount you can use within this period.

Yes, this filler is specifically designed for heavy-duty jobs and outdoor projects due to its tough, durable finish.

Clean all tools and equipment immediately after use with warm water. Once the filler has cured, it is very difficult to remove.

Yes, the cured filler is easily painted. Ensure the surface is clean and dry before applying paint.

It is suitable for filling metals, wood, stone, and most plastics. Always test on an inconspicuous area first for plastics.

Store the filler and hardener in their original, tightly sealed containers in a cool, dry place, away from direct sunlight and extreme temperatures.

The kit includes a filler spreader with a hardened and tempered steel blade, ideal for filling uneven and cracked areas.

Ensure the correct ratio of filler to hardener was used. Re-mix thoroughly, ensuring uniform color. Check that the hardener has not expired or been contaminated.

Ensure the surface is properly prepared and free of contaminants. The working time is short; mix only what you can apply quickly. For larger areas, consider a slower-setting filler.

This may be due to excessive shrinkage, often caused by applying too thick a layer in one go or poor adhesion. For deep fills, apply in layers, allowing each to partially cure before adding the next.

Surface was not adequately cleaned, dried, or prepared. Ensure all grease, dirt, and loose material are removed, and the surface is slightly abraded for better grip.