Best current price£69.00from Team Cycles
Shopping.co.uk recommended and popular offers
Team Cycles£69.00Visit shop Lezyne Unisex Silver Alloy Floor Drive Track Pump In
Visit shop
Frasers£85.00Visit shop Lezyne Alloy Floor Drive Track Pump - Silver Gloss
Visit shop4 offers from £69.00 - £85.00
View price history by clicking the chart icon.
The Lezyne Alloy Floor Drive is a high-pressure floor pump designed for cyclists who need precise and reliable inflation. Its key benefit is the durable, high-quality construction combined with an accurate oversized gauge for effortless tire maintenance. A potential caveat is its premium build, which may come at a higher price point than basic pumps.
| Model Part Number | 4712805991303 |
|---|---|
| Brand | Lezyne |
The Lezyne Alloy Floor Drive can reach a maximum pressure of 220 PSI (15.2 bar).
Yes, the ABS-1 Pro chuck is designed to be compatible with both Presta and Schrader valves.
Wipe the wood handle with a slightly damp cloth and dry it immediately. Avoid soaking the wood to prevent damage.
Please refer to the Lezyne official website or product packaging for specific warranty information, as it may vary by region and purchase date.
While the pump can achieve high pressures suitable for seating tubeless tires, it does not have a "burst" mode for initial rapid inflation. For best results with tubeless setup, a dedicated tire inflator or compressor might be more efficient.
The approximate dimensions are 653mm (height) x 258mm (width) x 215mm (depth).
The pump weighs approximately 1791g (1.79 kg).
Ensure the ABS-1 Pro chuck is securely attached to the valve stem. Check that the chuck's lever is fully engaged. Inspect the chuck and pump hose for any leaks or damage. For Presta valves, ensure the valve core is not stuck closed.
Remove the chuck and reattach, ensuring a firm seal. Check the rubber gasket inside the chuck for wear or damage and replace if necessary. If using on a Presta valve, ensure the valve is open.
Tap the gauge gently to ensure the needle is not stuck. If the issue persists, the gauge may require calibration or replacement; contact customer support.
Ensure the pump is on a stable surface. Check the steel piston area for any visible obstructions. A slight lubrication of the piston seal might be needed; consult the manufacturer's guidelines for appropriate lubricants.
Setup: The Alloy Floor Drive comes fully assembled and ready for use. Simply place it on a flat, stable surface. Connect the ABS-1 Pro chuck to your tire valve by pressing it firmly onto the valve stem. Ensure the chuck is securely seated before beginning to pump.
Compatibility: The included ABS-1 Pro chuck is designed to work seamlessly with both Presta and Schrader valves, making it compatible with virtually all bicycle tires.
Care: To maintain the pump's performance and appearance:
