Best current price£8.93from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£8.93Visit shop Masonmate® Masonmate Hollow Wall Anchor M6 X 52 Mm 0840T490052
Visit shop
B&Q£12.80Visit shop B&Q - 0840T490052 Hollow Wall Anchor M6 X 52mm 50 Mamhwam652
Visit shop7 offers from £8.93 - £14.42
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professional contractors seeking reliable fixings in hollow walls. The MasonMate Hollow Wall Anchor M6 x 52mm provides a durable, corrosion-resistant solution for securely mounting items like shelves and frames. A key caveat is that these anchors are specifically designed for hollow walls and may not be suitable for solid materials.
| Colour | Silver |
|---|---|
| Model Part Number | 0840T490052 |
| Brand | MASONMATE |
The holding capacity depends heavily on the wall material's thickness and integrity, and the type of screw used. For plasterboard, they are generally suitable for light to medium-duty loads. Always test the fixture's stability before use and consult load limit charts specific to your wall type if available.
No, these anchors are specifically designed for hollow walls. Using them in solid materials will not provide a secure fixing.
The ideal drill bit size depends on the specific hollow wall material. Typically, for M6 anchors, a drill bit between 10mm and 12mm is recommended, but it's best to refer to the packaging or manufacturer's guidelines for precise recommendations.
You can usually remove the anchor by unscrewing the screw completely. The anchor legs should retract, allowing you to pull the anchor out. If it's stuck, you may need to carefully push it through the hole or cut it flush with the wall.
Zinc plating provides a protective layer that significantly increases the anchor's resistance to rust and corrosion, ensuring a longer lifespan and maintaining its integrity.
Once installed and expanded, the anchors are designed for a permanent fixing. While you can remove and reinsert screws multiple times, removing and reinstalling the anchor itself may degrade its holding power over time.
The hole may be too large, or the wall material may be too thin. Try a slightly smaller drill bit or a different anchor type if the material is unusually soft.
Ensure the screw is an M6 size and is not damaged. Check that the anchor is fully inserted and that the screw is aligned correctly with the anchor's internal thread.
This can occur if excessive force is applied or if the wall material is brittle. Ensure you are using the correct drill bit size and not over-tightening the screw.
The screw may not be long enough to fully engage the expanding legs of the anchor, or the anchor might not have expanded properly. Remove the screw, ensure the anchor is seated correctly, and use a slightly longer M6 screw.
Setup:
Compatibility:
Care:
