Best current price£119.70from B&Q
Shopping.co.uk recommended and popular offers
B&Q£119.70Visit shop B&Q - Solution For Up And Down StaircasesBlackMulti PanelsUp To 135CmAndScrew Fit Gate67Cm105.5Cm
Visit shop1 offer from £119.70
View price history by clicking the chart icon.
The Safetots Multi-Panel Solution and Diagonal Fit Gate Package is designed for homeowners needing flexible safety barriers for non-standard openings, open staircases, or multiple staircase needs. Its key benefit is adaptable protection, especially useful for unusually shaped areas where standard gates may not fit securely. A potential caveat is that these are screw-fit gates, requiring drilling for installation, unlike pressure-fit options.
| Model Part Number | 14334 |
|---|---|
| Brand | Safetots |
The Multi-Panel Solution offers high flexibility for custom configurations in wide or oddly shaped areas, while the Diagonal Fit Gate is specifically designed for standard staircases and doorways with a trip-hazard-free design.
Yes, the Diagonal Fit Gate is specifically recommended for the top of stairs due to its bottom-bar-less design, which reduces tripping hazards. Both gates require secure screw mounting.
You will typically need a drill, drill bits, a screwdriver, a pencil for marking, and potentially a spirit level. Wall plugs may be required depending on your wall type. All necessary screws for mounting are usually included.
Clean the gate using a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaning materials that could damage the finish or mechanism.
Yes, the gates feature a secure double-action locking mechanism that can be operated with one hand by adults, while remaining difficult for children to open.
The Multi-Panel gate is 70cm high, and the Diagonal Fit Gate stands 73cm high once installed.
Both the Multi-Panel Solution and the Diagonal Fit Gate are screw-mounted for enhanced stability and security.
Check that the gate is mounted straight and securely. Ensure no objects are obstructing the latch mechanism. Verify that the wall brackets are firmly attached and the gate is correctly seated.
Re-tighten all screws on the wall brackets and the gate mounting hardware. Ensure wall plugs (if used) are secure in the wall.
Ensure the gate is properly aligned. Check for any debris in the locking mechanism. Gently try to operate the lock a few times; it may loosen with use. Avoid forcing the mechanism.
Ensure you are using the correct drill bit for your wall type. If drilling into masonry, use a masonry bit and appropriate wall plugs. If the wall is not suitable for drilling, consider alternative mounting solutions if available or consult a professional.
Setup:
Compatibility:
Care:
