Best current price£64.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£64.99Visit shop Satellite Splitter | 5 - 2400 Mhz | 11.5 Db| Number Of Inputs: 1 | Number Of Outputs: 4 | Impedance: 75 Ohm | Zinc | Silver 5412810298372
Visit shop1 offer from £64.99
View price history by clicking the chart icon.
The Nedis SSPL410ME is a 4-way satellite splitter designed for users needing to distribute a single satellite signal to multiple receivers. Its key benefit is reliable signal distribution in a durable zinc die-cast housing, allowing you to connect up to four devices. A potential caveat is the signal loss inherent in splitting, which may require an amplifier in certain setups.
| Model Part Number | SSPL410ME |
|---|---|
| Brand | Nedis |
The Nedis SSPL410ME supports frequencies from 5 MHz up to 2400 MHz.
No, this splitter does not require a separate power supply. It is designed to pass DC power from a receiver to the LNB if needed.
The signal loss (attenuation) varies across the frequency range but is typically around 11.5 dB maximum for each output.
While it covers a wide frequency range, it is specifically designed for satellite signals. For terrestrial TV, a dedicated terrestrial TV splitter is recommended.
This splitter uses standard F-connectors for all input and output ports.
The housing is designed for indoor use and should be protected from direct exposure to the elements.
Verify all F-connector connections are secure. Check that the input cable from the LNB is functioning correctly. Ensure the DC power pass-through is enabled if required for your LNB.
Check signal strength at the source (LNB/dish). Ensure cable lengths are not excessive. Consider using a signal amplifier if signal loss is significant due to cable length or splitting.
This is normal operation for a DC power pass-through splitter; only one output typically passes power. Ensure the LNB is connected to the output port that supports power pass-through if required.
Gently tighten the F-connector. If the thread is damaged, the cable or splitter port may need replacement.
Setup:
Compatibility:
Care:
