QuickCure Clay Pearl Powders - Ranger - QCP71686

To achieve a high-gloss finish, apply the pearl powder to a wet medium or a tacky surface, then seal the project with a high-gloss varnish or resin once dry.

While primarily designed for clay and mixed media, they might be used on fabric if mixed with a fabric medium or textile adhesive. Test on a small, inconspicuous area first.

The built-in resin formula provides good adhesion. For maximum permanence, especially on items that will be handled frequently, it is recommended to seal the finished piece with a clear topcoat or varnish.

QuickCure Clay Pearl Powders are available in eight different pearlescent colors.

Clean brushes immediately after use. If using dry, tap off excess powder and brush clean. If mixed with water-based mediums, rinse with soap and water. For other mediums, use the appropriate solvent.

Yes, you can mix different pearl powder colors together to create custom shades and effects.

When stored properly in a sealed jar in a cool, dry place, the powders should maintain their quality for an extended period, typically several years.

Ensure the surface is slightly damp or has an applied wet medium for dry application. For wet application, ensure the powder is mixed thoroughly with the medium before applying.

Apply the powder more evenly with a soft brush or sponge. For wet applications, mix the powder thoroughly with the medium and apply consistently.

Try applying over a lighter base color or mixing with a clear medium for a more saturated effect. Ensure the powder is fresh and has been stored properly.

Add the powder gradually to the medium while stirring continuously to prevent clumping. A small amount of medium can be used to pre-wet the powder before adding it to the bulk of the medium.