Best current price£57.59from eBay
Shopping.co.uk recommended and popular offers
eBay£57.59Visit shop T-Cut Perfect Bumper & Trim Permanent Black Vinyl Restorer & Reviver 350ml x6
Visit shop3 offers from £57.59 - £93.99
View price history by clicking the chart icon.
T-Cut Perfect Bumper & Trim is designed for vehicle owners looking to restore scuffed or sun-faded black plastic and vinyl surfaces to their original aesthetic. It provides a permanent, pigmented finish that effectively hides signs of aging on unpainted trim, bumpers, and mouldings. Users should note that this product requires precise application conditions, as it must be used in temperate, dry weather and cannot be applied in direct sunlight or extreme temperatures.
| Model Part Number | TBB350 |
|---|---|
| Brand | T-Cut |
No, this product is specifically formulated for unpainted black plastic and vinyl trim.
No, the formula is designed to dry to a finish without the need for buffing.
Allow the first coat to dry for at least 15-20 minutes before applying a second coat.
No, you should only apply this product under cover or in dry weather, away from direct sunlight.
Wash the affected area immediately with cold water. Gloves should always be worn during use.
T-Cut Perfect Bumper & Trim is specifically designed to restore black plastic and vinyl.
Ensure the surface was thoroughly degreased prior to application and use a fresh microfibre cloth to maintain even pressure.
Check the ambient temperature; if it is below 10 degrees or above 20 degrees, the product will not cure properly. Move to a temperate, dry environment.
This often indicates that the plastic surface still had residual wax or degreaser present. Clean the area again and re-apply.
Preparation is critical for this product. You must wear gloves at all times to prevent skin staining. Before application, ensure your workspace is under cover and the ambient temperature is between 10 degrees and 20 degrees Celsius. Avoid high-heat environments or direct sunlight as these interfere with the drying process and can cause streaks. For care, always store the bottle in an upright position. If you spill the product during application, use cold water immediately to clean the affected area before the pigment sets.
