Best current price£36.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£36.00Visit shop (End Trim Light Walnut 2400X30mm, 2) Acoustic 3D Timber Oak Slatted Wall Panel - 2400X600 - Natural Decor 5060725142039
Visit shop5 offers from £36.00 - £130.00
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and homeowners looking to enhance the aesthetic appeal and sound environment of their interior spaces. The Acoustic Slatted Wall Panel - End Trim provides a premium finish for the edges of acoustic wall paneling, helping to reduce noise by up to 25% with a Weighted Noise Absorption Coefficient (aw) of 0.25 when mounted directly to a solid wall. A potential caveat is that optimal acoustic performance is achieved when installed as part of a larger paneling system.
| Model Part Number | End Trim x2 Grey 2400x30mm |
|---|---|
| Brand | Dirty Pro Tools |
These end trims are designed to provide a clean, finished edge for the vertical sides of Acoustic Slatted Wall Panels, enhancing both the appearance and integration of the paneling system.
When installed directly to a solid wall, these panels can reduce noise by up to 25%, achieving a Weighted Noise Absorption Coefficient (aw) of 0.25.
The acoustic backing is 11mm thick and made from PET fibers, containing up to 60% recycled content derived from PET bottles.
Yes, these panels are designed for installation by competent DIY enthusiasts. Basic tools and a suitable adhesive are typically required.
Clean using a soft, slightly damp cloth. Avoid abrasive cleaners and excessive moisture.
Each of the two trim pieces measures 2400mm in length and 30mm in width.
Based on the product information, similar trims are available in Light Walnut and Dark Oak finishes, as well as Grey Oak main panels.
Ensure the main panels are installed perfectly plumb and level. Check for any debris or unevenness on the wall surface where the trim will be applied. Trim to fit if necessary, ensuring clean, straight cuts.
Ensure the surfaces are clean, dry, and free from dust or grease before applying adhesive. Use a high-quality grab adhesive specifically recommended for wall paneling. Apply firm pressure and allow adequate curing time as per the adhesive manufacturer's instructions.
Handle the trims with care, especially during cutting and fitting. Use sharp tools and protective measures. Minor scuffs can sometimes be lightly buffed out, but significant damage may require replacement.
Setup: These end trims are intended to be installed at the vertical ends of the Acoustic Slatted Wall Panels. Ensure the main panels are securely installed first. The trims can typically be adhered using a strong grab adhesive suitable for wall panels and wood, or mechanically fastened if preferred and the substrate allows. Always follow adhesive manufacturer's guidelines for application and curing.
Compatibility: These grey end trims are designed to match the Acoustic Slatted Wall Panel - Grey Oak 2400x600mm and other grey oak variants. They are also compatible with the acoustic backing system of the main panels, ensuring consistent acoustic performance at the edges.
Care: To clean the panels, use a soft, slightly damp cloth. Avoid abrasive cleaners or excessive moisture, as this can damage the finish and the acoustic material. Regular dusting with a dry cloth is recommended for maintenance. Ensure the panels are not exposed to direct sunlight for prolonged periods to prevent fading.
