Best current price£61.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£61.99Visit shop B&Q - Luminosa Super Slim 2 Floodlight Ip67 3000Lm 30W Tuya 3000/4000/6500K Pir 120Deg. Non Dimmable 100Lm/w Black
Visit shop1 offer from £61.99
View price history by clicking the chart icon.
The Luminosa Lighting Super Slim 2 Floodlight is designed for users needing robust outdoor lighting with adjustable color temperature and motion sensing capabilities. Its key benefit is providing bright, efficient illumination (3000 lumens) with enhanced security features, although it is important to note that this model is non-dimmable. Key features include a durable aluminum body, IP67 water and IK08 impact resistance, CCT switchable Kelvin settings, and an integrated PIR sensor.
| Colour | Black |
|---|---|
| Brand | Integral LED |
Please refer to the retailer or Luminosa Lighting's official documentation for the specific warranty period and terms, as these can vary.
No, the Luminosa Lighting Super Slim 2 Floodlight is non-dimmable and cannot be used with a dimmer switch.
The color temperature (CCT) is selected using a switch, typically located on the back of the unit or near the LED, *before* installation or final wiring. You can choose between 3000K, 4000K, or 6500K.
IP67 means the light is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. IK08 indicates resistance to impact from falling objects.
The PIR sensor has a 120-degree detection angle. The maximum detection range will depend on environmental factors and the sensitivity setting, but it is designed for effective area coverage.
The floodlight comes with a 1-meter pre-wired cable. For installations requiring a longer reach, you may need to use an appropriate junction box and extension cable, installed by a qualified electrician.
Yes, the floodlight is designed for outdoor use and is built to withstand various weather conditions. However, prolonged direct sunlight might affect the PIR sensor's ambient temperature reading, potentially influencing its sensitivity.
Verify that the unit is correctly wired to a live power source. Check the circuit breaker. Ensure the CCT switch is set and the unit is properly connected.
Ensure the sensor is clean and unobstructed. Check that the detection angle and sensitivity are adjusted appropriately. Verify the unit is receiving power and is not in a continuous 'on' state if not intended.
Check all electrical connections for security. If the issue persists, there may be an internal fault, and the unit may require replacement. Ensure it is not connected to a dimmer.
Turn off power to the unit, then re-select the desired CCT using the switch. Ensure the switch is firmly in position. If the problem persists, contact support.
Setup:
Compatibility:
Care:
