Best current price£83.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£83.99Visit shop B&Q - 5W20 Fully Synthetic Ford Ecoboost Engine Oil C5 Ford Wss-M2C948-B 8L
Visit shop2 offers from £83.99
View price history by clicking the chart icon.
This fully synthetic engine oil is designed for Ford's modern, fuel-efficient petrol engines, offering enhanced protection and improved fuel economy. It ensures essential protection during startup and long-term benefits like reduced wear on critical engine components. However, its specific formulation means it's primarily intended for engines requiring the Ford WSS-M2C948-B performance level.
| Model Part Number | WSS-M2C948-B |
|---|---|
| Brand | Morris |
This oil is primarily designed for modern Ford petrol engines that require a 5W-20 viscosity oil meeting the Ford WSS-M2C948-B specification. Always check your vehicle's owner's manual to confirm compatibility.
This oil meets ACEA C1 specification, which is typically for Low SAPS (Sulphated Ash, Phosphorus, Sulphur) oils used in certain diesel engines with diesel particulate filters (DPFs). However, always confirm your specific diesel engine's requirements and consult your owner's manual.
The '5W' indicates the oil's viscosity in cold conditions (W for Winter), and '20' indicates viscosity at operating temperature. 5W-20 is a common choice for modern, smaller-displacement, fuel-efficient engines, offering good flow at low temperatures and adequate protection at higher temperatures.
Refer to your vehicle's owner's manual for the recommended oil change intervals. The manufacturer's schedule is the best guide, though synthetic oils like this often support extended drain intervals.
While designed for fuel efficiency, its synthetic formulation and advanced additives provide robust protection under various conditions, including spirited driving. However, for track or extreme performance use, consult specifications for oils designed explicitly for those purposes.
This is a specific performance specification set by Ford for engine oils, indicating that the oil has met stringent requirements for use in certain Ford engines, particularly related to fuel economy and emissions system compatibility.
Ensure the correct oil level is maintained. If the light persists, check the oil pressure sensor and consult a qualified mechanic.
Verify that the correct viscosity and specification oil are being used. Low oil levels or an incorrect oil type can cause increased engine noise. Check oil level and consult your owner's manual for proper specification.
While this oil is designed to improve fuel economy, other factors can influence consumption. Ensure tire pressure is correct, air filter is clean, and perform regular maintenance as per your vehicle's service schedule.
Compatibility:
This oil is specifically recommended for use in petrol engines where the manufacturer specifies a 5W-20 viscosity grade oil and requires compliance with the Ford WSS-M2C948-B performance level. It also meets API SP and ACEA C1 specifications. Always consult your vehicle's owner's manual to confirm the correct oil specification before use.
Oil Changes:
Follow the oil change intervals recommended in your vehicle's service schedule. Using a high-quality synthetic oil like this can sometimes allow for extended drain intervals, but this should be verified with the vehicle manufacturer's guidelines.
Storage:
Store the oil in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is securely fastened to prevent contamination and evaporation.
Disposal:
Dispose of used engine oil responsibly through approved recycling centers or local waste disposal facilities. Do not pour used oil down drains or onto the ground.
