DEWALT DCLE15221G-GB - Green Rotary Laser

The integrated Li-Ion battery provides up to 40 hours of runtime on a full charge.

The laser charges to 100% in approximately one hour using the USB-C cable.

The working range is 30 meters without a detector, and up to 600 meters with the included digital detector.

Yes, the DEWALT DCLE15221G-GB is IP66 rated, making it dust-tight and water-resistant, suitable for tough jobsite conditions.

The single slope function is ideal for tasks requiring precise inclines, such as grading, drainage installation, and other landscape or civil engineering projects.

The laser is supplied with a detector, detector clamp, remote control, wall mount, target card, USB-C cable, charging adapter, 4 x AA batteries, and a TSTAK VI case.

Yes, as long as the power bank has a USB-C output port and provides sufficient power, it can be used to charge the laser.

Ensure the lens is clean and free of debris. Check battery level and charge if necessary. In very bright conditions, use the digital detector or a laser viewing plate.

Verify that the laser is placed on a stable and relatively level surface. Ensure the unit is not being subjected to excessive vibration. Check for any obstructions around the rotating head.

Connect the unit to a USB-C power source and check if the charging indicator lights up. Ensure the USB-C cable and power source are functioning correctly. If the battery is completely depleted, allow it to charge for a short period before attempting to power on.

Ensure the detector is powered on and within the laser's working range. Check that the detector is aligned with the laser beam. Clean the detector's receiving window.

Ensure the laser is properly calibrated (refer to manufacturer's manual for calibration procedures if applicable). Check that the surface the laser is placed on is stable and not vibrating. Confirm the correct operating mode and settings are selected.