Shopping.co.uk

D-C-Fix Self-Adhesive Vinyl Wrap - Sonoma Oak Light - 90cm x 3m

D-C-Fix Self-Adhesive Vinyl Wrap - Sonoma Oak Light - 90cm x 3m

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£23.97from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£23.97Visit shop

B&Q - Sonoma Oak Light 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops

Visit shop

One Offer

1 offer from £23.97

View price history by clicking the chart icon.

B&QB&Q - Sonoma Oak Light 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£23.97
Visit shop

Product Information

Full details

This D-C-Fix self-adhesive vinyl wrap in Sonoma Oak Light is designed for homeowners and renters looking to refresh surfaces like kitchen worktops, tabletops, and furniture on a budget. Its key benefit is providing a durable, realistic woodgrain effect without the cost and hassle of replacement. A caveat is its heat resistance limit of 70°C, requiring the use of worktop savers for hot pans. The vinyl offers easy application with repositionable adhesive and a grid on the reverse for guidance, making DIY surface updates accessible.

All features

Model Part Number200-5595-3
Brandd-c-fix

Extended Product Information

FAQs

Can I reapply the vinyl if I make a mistake?

Yes, the water-based adhesive is repositionable. You can gently peel back the vinyl and re-apply it, especially if done soon after the initial placement.

Is this vinyl suitable for high-traffic areas?

Yes, the vinyl has a durable, wipe-clean surface. However, for very high-traffic areas or surfaces prone to heavy wear, consider protective measures like worktop savers.

How do I remove the vinyl when I want to change it?

Gently heat the vinyl with a hairdryer on a low setting. This softens the adhesive, making it easier to peel off cleanly without leaving excessive residue.

What is the maximum temperature this vinyl can withstand?

The vinyl is heat resistant up to 70°C. It is not suitable for direct contact with hot pans or dishes.

Do I need special tools to apply it?

While not strictly essential, a felt edge smoother and a sharp utility cutter are highly recommended for a professional finish and easier application. Scissors can be used for basic trimming.

Can I use this on a bathroom surface?

Yes, provided the surface is flat, smooth, and well-sealed, especially around areas prone to moisture like sink edges. Ensure good ventilation.

Is the material safe for use in kitchens?

Yes, the material is phthalate-free and made in Germany. Always follow care instructions, especially regarding heat resistance and sealing edges.

Troubleshooting

Vinyl won't stick properly

Ensure the surface is thoroughly clean, dry, and free from dust or grease. For some surfaces, a primer might be beneficial, though not typically required for smooth, non-porous materials.

Air bubbles or creases formed during application

Gently lift the vinyl back to the point of the bubble or crease. Re-apply the vinyl using a felt smoother, working from the edge of the bubble outwards. A hairdryer on a low setting can help soften the vinyl to allow for easier smoothing.

Vinyl lifting at the edges

Ensure a tight seal around edges, particularly near water sources like sinks. Apply a thin bead of clear silicone sealant along the edges to secure them and prevent moisture from getting underneath.

Difficulty applying around curved edges

Gently warm the vinyl with a hairdryer on a low setting. This makes the material more pliable and easier to stretch and mould around curves without tearing. Do not overheat.

Stains or marks on the vinyl surface

Wipe spills immediately. For tougher marks, use a damp cloth with mild soap. Avoid harsh chemicals or abrasive cleaning tools.

Pros and Cons

Pros

  • Budget-friendly alternative to surface replacement
  • Easy for DIY application with minimal tools
  • Removable, suitable for renters
  • Realistic and attractive woodgrain effect
  • Repositionable adhesive aids in error correction
  • Wipe-clean and durable surface

Cons

  • Limited heat resistance (70°C) requires caution with hot items
  • Not suitable for direct contact with hot pans
  • Requires careful sealing around sinks/hobs to prevent water damage
  • May not be suitable for heavily textured or uneven surfaces
  • Requires care during application to avoid air bubbles and creases

Setup, Compatibility & Care

Setup:

  1. Ensure the surface you intend to cover is clean, dry, and smooth. Dust, grease, or moisture can affect adhesion.
  2. Measure and cut the vinyl using the grid on the reverse for accuracy. Leave a small overlap where appropriate.
  3. Peel back a small section of the backing paper from one edge.
  4. Carefully align the vinyl with the edge of the surface and begin to apply, smoothing down as you go.
  5. Use a felt edge smoother to push out air bubbles towards the nearest edge.
  6. For curved edges, use a hairdryer on a low setting to gently warm and stretch the vinyl.
  7. Trim any excess material with a sharp utility cutter.

Compatibility:

This vinyl is suitable for application on any flat, smooth surface including wood, metal, glass, and previously painted surfaces. It is not recommended for heavily textured, unsealed, or damaged surfaces.

Care:

  • Wipe spills immediately to prevent staining.
  • Clean the surface with a damp cloth and mild detergent if necessary.
  • Avoid abrasive cleaners or scouring pads, as these can scratch the surface.
  • Use worktop savers for hot pans and chopping boards for food preparation.
  • Apply a silicone sealant around the edges, especially near sinks and hobs, to prevent water from getting underneath and lifting the vinyl.

Price History

DatePrice
Visit shop