Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR Camera Lens - Nikon

Yes, the lens's Silent Wave Motor (SWM) provides relatively quiet and smooth autofocus, which is beneficial for video. However, for critical video work, manual focus may yield more consistent results, especially in challenging lighting.

The closest focusing distance for this lens is 0.5 meters (1.64 feet).

Yes, the lens is compatible with Nikon DX-format cameras. However, please note that the effective focal length will be cropped, resulting in a field of view equivalent to approximately 42-450mm.

VR helps to counteract camera shake by moving lens elements. It allows for sharper handheld shots at slower shutter speeds than would normally be possible, offering up to four stops of improvement.

The maximum aperture is f/3.5 at the 28mm wide end and decreases to f/5.6 at the 300mm telephoto end.

No, this lens does not have a manual aperture ring. Aperture is controlled electronically via the camera body.

The lens uses a standard 77mm filter size.

Ensure the camera is in good light. Try switching focus modes to AF-S (Single Servo AF) for stationary subjects or AF-C (Continuous Servo AF) for moving subjects. Clean the lens contacts on both the lens and the camera body.

Confirm the Vibration Reduction (VR) is set to 'ON' if shooting handheld. Ensure the lens is properly mounted. Check that the focus mode switch on the lens (if applicable) is set correctly. Try shooting at faster shutter speeds or using a tripod.

Check that the lens is securely attached. Clean the electrical contacts on both the lens and the camera body with a dry, lint-free cloth. Try the lens on a different compatible camera body to diagnose if the issue is with the lens or the camera.

This is typically an indication of internal damage or a malfunction. Contact Nikon support or an authorized repair service.