Sealey Vacuum Cleaner Wet & Dry 10L 1000W - Red - Black

While it can handle general workshop dust, for very fine dust like plaster or silica dust, it's recommended to use a vacuum specifically rated for such materials or ensure appropriate filtration is used and maintained meticulously to protect the motor.

For dry operation, ensure the cloth filter is installed. For wet operation, remove the cloth filter and install the foam filter. Always ensure the drum is emptied and cleaned appropriately between wet and dry use.

The power cable is 2 meters long.

It is supplied with crevice and floor tools, cloth and foam filters.

The cloth filter should be cleaned after each dry use. The foam filter should be cleaned after each wet use. Ensure they are dry before storage or re-use for dry vacuuming.

No, this vacuum cleaner is not designed for vacuuming hot ash or embers, as this can be a fire hazard and damage the unit.

Ensure the power cable is securely plugged into a working electrical outlet. Check if the power switch is in the 'on' position.

Check if the drum is full and needs emptying. Ensure the filters are clean and correctly installed. Check the hose and tools for any blockages.

Inspect the motor head and drum for any foreign objects. Ensure all connections are secure and the filters are properly fitted.

Verify that the vacuum port is sealed correctly and that there are no blockages in the blower path. Ensure the correct filter setup is in place for blowing.