Wessex Electrical Switched Socket - 2 Gang - Brushed Steel - USB A & C

This 2 Gang Switched Socket from Wessex Electrical features both USB Type A and Type C ports with ...

Best current price£22.50from B&Q

One Offer

1 offer from £22.50

View price history by clicking the chart icon.

B&QB&Q - Windsor 2G 13 Amp Socket With Usb Type A & C 4.8
Free delivery in 1–3 days
£22.50
Visit shop

Product Information

Full details

This Wessex Electrical 2 Gang Switched Socket is designed for homeowners and electricians seeking a modern, convenient power solution. It offers the primary benefit of simultaneously charging multiple devices via integrated USB-A and USB-C ports, alongside traditional AC outlets, with a powerful 4.8A shared output. A potential caveat for DIY installers is the requirement for a 35mm back box. Key features include fast charging, a sleek brushed steel finish with white trim, matching rockers, a raised rounded profile, and a protective rear gasket.

All features

Model Part Number4.8
BrandWessex Electrical

Extended Product Information

FAQs

What is the total USB charging output?

The total shared output for both USB Type-A and Type-C ports is 4.8 Amps.

Can I charge a laptop using the USB ports?

The socket can charge many laptops, especially those that support USB-C charging. However, the charging speed will depend on the laptop's power requirements and whether the combined 4.8A output is sufficient.

Do I need a special back box for this socket?

Yes, this socket requires a standard 35mm deep back box for installation.

What is the finish of the socket?

The socket has a Brushed Steel finish with White Trim on the rockers.

Are the USB ports independent?

No, the USB Type-A and Type-C ports share a combined 4.8A output.

Is this socket suitable for a bathroom?

This socket is designed for general household use. Specific IP ratings for bathroom zones are not mentioned, so it is recommended to consult electrical regulations or a qualified electrician regarding bathroom installations.

How do I clean the socket?

Clean the socket with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaning materials.

Troubleshooting

Switched sockets are not working.

Check the main power supply at the fuse box or consumer unit. Verify all wiring connections to the socket terminals are secure and correct according to the wiring diagram.

USB ports are not charging devices.

Ensure the socket is receiving power. Check that the USB cable is fully inserted into the correct port (Type-A or Type-C). Try a different USB cable and device to rule out cable or device issues. Confirm that the total load does not exceed the 4.8A shared limit.

Charging is slow.

The 4.8A output is shared between both USB ports. If multiple devices are drawing power, charging speed per device will be reduced. Ensure the connected device supports fast charging standards compatible with the USB port used. High-power devices may charge at a reduced rate.

Socket is loose or not flush with the wall.

Check that the socket is securely fastened to the back box. Ensure the back box is correctly installed and flush with the wall surface. Make sure no debris is preventing the faceplate from sitting flat.

Pros and Cons

Pros

  • Combines traditional power outlets with modern USB charging.
  • Fast charging capabilities for USB devices.
  • Supports both USB-A and USB-C standards.
  • Stylish brushed steel finish with white trim.
  • Easy to integrate into existing electrical systems (with appropriate back box).

Cons

  • Requires a 35mm back box for installation.
  • USB output is shared, not per-port.
  • May require professional installation for users unfamiliar with electrical work.

Setup, Compatibility & Care

Setup:

  1. Ensure the power supply is switched off at the mains.
  2. This socket requires a standard 35mm deep back box. If a shallower box is present, it will need to be replaced.
  3. Wire the socket according to standard UK electrical regulations, connecting the live, neutral, and earth wires to the appropriate terminals for the switched sockets.
  4. Connect USB power wiring as per the manufacturer's instructions (refer to the product manual for specific details).
  5. Carefully fit the socket into the back box, ensuring the rear gasket is correctly positioned.
  6. Secure the faceplate using the provided screws.
  7. Restore power at the mains and test the socket and USB ports.

Compatibility:

  • The AC sockets are compatible with standard UK Type G plugs.
  • USB Type-A port supports most standard USB-A charging cables.
  • USB Type-C port supports USB-C charging cables for compatible devices.
  • The 4.8A shared output is suitable for most smartphones, tablets, e-readers, and other low to medium power USB devices. High-power laptops may charge slower or not at all depending on their specific requirements.

Care:

  • Regularly clean the socket with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
  • Ensure the USB ports are free from dust and debris.

Similar items

Price History

DatePrice
Visit shop