Primaflow Prima Plus Compression Reducing Set - 3 Part - 15 X 12mm

This fitting is used to connect a 15mm pipe to a 12mm pipe in water and gas installations.

Yes, the Primaflow Prima Plus Compression Reducing Set is WRAS approved, making it safe for use with potable water.

You will need two wrenches (e.g., adjustable spanners or pipe wrenches) to tighten the compression nut and hold the fitting body.

It is compatible with specific types of plastic pipes designed for compression fittings. Always check the compatibility of your plastic pipe with the fitting manufacturer's recommendations.

The Kite Mark is a voluntary British certification mark indicating that a product has been manufactured to high standards of quality and safety.

It is manufactured to EN 1254, a European standard for copper and copper alloy fittings.

No, compression fittings create a seal through the mechanical compression of the ring onto the pipe and fitting. Sealants or tapes are generally not required and can interfere with the seal.

Check that the compression nut has been tightened sufficiently. Ensure the pipe ends were clean and free of burrs, and the compression ring was correctly seated. If the issue persists, the fitting may need to be replaced.

Verify that the correct size pipes are being used and that the fitting is aligned correctly. Ensure there are no cross-threads. Use appropriate wrenches to apply steady force.

Confirm that the pipes conform to the relevant standards (e.g., EN 1057 for copper). Ensure the correct compression ring is used for the respective pipe size. Check for damage or defects on the pipe ends or inside the fitting.