Motion Sensor - 360 Degree Recessed PIR Ceiling Occupancy Detector Light Switch - B2C

The motion detection range is dependent on the installation height, with a radius of 1 to 8 meters that can be adjusted.

The product description specifies compatibility with incandescent and energy-saving fluorescent lamps. While some LED lights might function within the load limits, compatibility is not explicitly guaranteed for all LED types, especially those with high inrush currents. It's best to consult the manufacturer or test with a specific LED model.

These adjustments are typically made using small potentiometers or dials located on the sensor unit itself, often accessible after removing the cover. Refer to the product's manual for specific instructions and tool requirements.

Yes, the GTV CR-5 Mini is designed for both indoor and outdoor applications, provided it is installed in a location protected from direct rain and extreme weather conditions.

The sensor consumes approximately 0.45 W during operation and 0.1 W in standby mode.

Yes, it functions as an automatic switch, controlling the power to the connected light fixture based on detected motion and ambient light.

The sensor features a 360° detection angle.

Check if the power supply is connected correctly. Verify that the ambient light level is below the set sensitivity threshold and that motion is being detected within the range. Ensure the load connected does not exceed the maximum capacity.

Confirm that the operating time is not set to its maximum continuous duration. Check for continuous sources of motion or heat that might be triggering the sensor. Adjust the sensitivity if necessary.

The twilight sensitivity may be set too high. Adjust the lux setting to a lower value to ensure it only activates in darker conditions.

Ensure the sensor is not subjected to vibrations or heat sources that could cause false triggers. Check for loose wiring connections. Verify the detection range is appropriate for the area.