Best current price£11.99from Team Cycles
Shopping.co.uk recommended and popular offers
Team Cycles£11.99Visit shop Enduro Bearings Unisex Silver Mr 15267 Llu/Llb - Abec5 Bearing - 15Mm X 26Mm X 7Mm
Visit shop1 offer from £11.99
View price history by clicking the chart icon.
The Enduro Bearings ABEC 5 15267 LLU is a high-precision sealed cartridge bearing engineered for cyclists and mechanical technicians who require smooth, reliable rotation in demanding environments. Featuring Grade 5 Chromium Steel balls and nylon ball carriers, it provides an excellent balance of durability and low friction; however, users should ensure precise measurements before installation, as its 15x26x7mm dimensions are specific to certain hub and bottom bracket standards.
| Model Part Number | EB9838 |
|---|---|
| Brand | Enduro Bearings |
These numbers correspond to the dimensions: 15mm inside diameter, 26mm outside diameter, and 7mm thickness.
Yes, they come pre-lubricated with high-quality grease specifically suited for the LLU seal design.
While high-precision, these are specifically designed for mechanical cycling components; check the RPM limits of your motor before use.
If you detect excessive play, audible grinding noises, or the rotation feels restricted, the bearing has likely reached its end of life.
No, ABEC-5 refers to precision tolerances. Longevity depends on proper installation, maintenance, and environmental exposure.
Verify that the bearing was not over-pressed or that the surrounding housing is not out-of-round.
Inspect for contamination that may have bypassed the seal during poor installation or check if the bearing has suffered an impact load.
Confirm that the hub shell bore has not been enlarged or worn from previous bearing failures.
Installation should be performed using a dedicated bearing press to ensure the load is applied evenly to the outer race. Never strike the inner race directly with a hammer or punch, as this will cause brinelling and premature failure. Before installation, confirm that the housing bore and shaft diameter are within the manufacturer’s tolerances to prevent binding. Once installed, these bearings are maintenance-free due to the integrated LLU seals; do not attempt to pry the seals off, as they are not designed to be removed and re-seated. Periodically check for any lateral play or "grittiness" during routine maintenance of your equipment.
