Best current price£24.48from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£24.48Visit shop Wago Fieldbus Decentralized Peripheral - Power Supply/Segment Module - 750-602
Visit shop11 offers from £24.48 - £650.80
View price history by clicking the chart icon.
10 offers from £6.54 - £180.50
View price history by clicking the chart icon.
The WAGO 750-602 is a 24 VDC power supply module designed for the 750 Series Fieldbus system. It is ideal for industrial automation engineers and technicians needing a reliable power source for I/O modules, offering a maximum output current of 10A. A key consideration is that the total current draw from all connected I/O modules must not exceed this limit, requiring careful system planning or the addition of intermediate supply modules for higher current demands.
| Model Part Number | 750-602 |
|---|---|
| Brand | WAGO |
The WAGO 750-602 can supply a maximum of 10A. It's crucial that the combined current draw of all connected I/O modules does not exceed this limit.
This module is specifically designed for the WAGO 750 Series Fieldbus system. Compatibility with other series is not guaranteed.
The module uses WAGO's Cage Clamp connection system. Insert a screwdriver into the designated opening to open the clamp, insert the conductor, and then remove the screwdriver to secure the connection.
The module can operate in relative humidity from 0% to 95% (non-condensing) and at temperatures ranging from -25 °C to 85 °C.
Ensure there is adequate space around the module for air circulation. Avoid installing it in tightly packed enclosures without ventilation. The module is designed for standard industrial control cabinet environments.
If the total current draw exceeds 10A, the module's overcurrent protection may trigger, leading to a loss of power for the connected I/O modules. You may need to add intermediate supply modules to distribute the load.
The module has an IP20 rating, which means it is protected against solid objects larger than 12.5 mm (like fingers) but offers no protection against water ingress.
Verify the 24 VDC input power is connected correctly and is within the operating voltage range. Check all wiring connections for proper contact.
Reduce the total current load of the connected I/O modules. If the load is consistently high, consider adding intermediate supply modules.
Ensure there is sufficient airflow around the module and that it is not installed in an enclosed space without ventilation. Check if the total current draw is within the specified limits.
Check for loose wire connections at both the power input and the I/O module outputs. Ensure the DIN rail is properly grounded if applicable to your setup.
Setup:
Compatibility:
Care:
