Draper Tools Adhesive Spreading Trowel - Soft Grip - 120 x 280mm

This trowel is primarily designed for spreading adhesives and mortars, particularly in tiling and flooring applications, thanks to its serrated blade.

The blade is made of carbon steel, which is durable but can rust if not properly cared for. It is essential to clean and dry the blade thoroughly after each use and consider oiling it for storage.

The blade is 120mm wide.

While it can be used for very thin skim coats, this trowel is specifically designed for spreading adhesives and is not ideal for general plastering, which typically requires a different type of trowel with a flat, smooth edge.

Wipe the handle with a damp cloth. Avoid using harsh chemicals or solvents that could damage the grip material.

The total length of the trowel, including the handle, is approximately 280mm.

The serrated edge is designed to create uniform ridges in the adhesive, which promotes better adhesion and prevents air pockets. This is ideal for materials like tile adhesive.

Ensure the blade is clean and dry before use. For persistent sticking, a light application of release agent or oil (ensure it doesn't contaminate your adhesive) might help, but thorough cleaning after each use is primary.

Check that the serrations on the blade are clear of debris. Ensure you are holding the trowel at a consistent angle relative to the surface. The depth of the ridges can be adjusted by the angle and pressure applied.

Light rust can often be removed with a fine-grit sandpaper or steel wool. Ensure the blade is thoroughly dried after cleaning and consider applying a protective oil for storage.