Heavy Duty Rough Surface Exterior Masking Tape - Orange 48mm x20m

This tape is specifically engineered for rough and textured exterior surfaces such as brick, stucco, and concrete. It also performs well on wood.

For optimal residue-free removal, it is recommended to remove the tape within 7 days of application. The tape is UV and weather resistant for up to 7 days.

The tape is designed for 7-day residue-free clean removal. Leaving it on for longer periods, especially in direct sunlight or extreme weather, may increase the chance of residue.

Yes, the highly visible orange color helps in easy application and ensures you can clearly see the masked areas for precise painting and straightforward removal.

While primarily designed for exterior use on rough surfaces, it could be used indoors on similar textured surfaces where strong adhesion and clean removal within 7 days are needed. However, always test in an inconspicuous area first.

The 7-day limit is for guaranteed residue-free removal. Leaving it on longer may result in the adhesive becoming more difficult to remove cleanly, potentially requiring an adhesive remover.

The tape is weather-resistant, meaning it can withstand typical outdoor conditions including light moisture. However, it is not designed to be submerged in water.

Ensure the surface is clean, dry, and free from dust, oil, or moisture. Reapply pressure along the edges to improve contact.

Press down the edges firmly to create a better seal. Ensure the tape is applied smoothly without gaps. Allow paint to dry to a touch-up state before applying a second coat, if applicable.

Remove the tape within the recommended 7-day period. If residue remains after 7 days or due to extreme weather, use a mild adhesive remover and test on a small area first.

While designed to be easy-to-tear, ensure you are pulling at a consistent rate. If issues persist, a utility knife might offer more control for intricate cuts, though not typically necessary.