Best current price£6.48from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.48Visit shop Kenable Power Cord Uk Plug To Right Angle Figure 8 Lead Cable C7 2M White
Visit shop
B&Q£7.25Visit shop B&Q - Power Cord Uk Plug To Right Angle Figure 8 Lead Cable C7 2M White
Visit shop3 offers from £6.48 - £7.25
View price history by clicking the chart icon.
This Kenable 007691 power cord is designed for users needing to connect devices with a Figure 8 (C7) port in confined spaces, such as behind wall-mounted TVs or entertainment units. Its primary benefit is the right-angle connector, which significantly reduces the cable's protrusion, preventing strain and allowing for closer placement of equipment. A potential caveat is its 2-meter length, which might be insufficient for longer distances. The cord features a standard UK mains plug and a 90-degree C7 connector, rated for 3A at 240V, with a white, 0.75mm² 2-core cable.
| Model Part Number | 007691 |
|---|---|
| Brand | kenable |
This cable uses a standard UK 3-pin mains plug on one end and a 90-degree Figure 8 (IEC C7) connector on the other end.
The cable is rated for 3 Amps at 240 Volts AC.
The right-angle C7 connector protrudes approximately 2cm from the device's power port when connected.
Only if your laptop power brick has a Figure 8 (C7) input port. This cable is not compatible with the more common C13 (kettle lead) input found on many larger power supplies.
The cable has a length of 2 meters.
No, this cable is designed for indoor use only and is not rated for outdoor conditions.
'Non-rewireable' means the UK plug is factory-sealed and cannot be opened or modified to change the fuse or wiring.
Ensure both the UK mains plug and the C7 connector are fully inserted into the socket and device, respectively. Check that the power socket is functional by testing with another device. Verify the device itself is receiving power.
Inspect the cable and connectors for any visible damage. Ensure the C7 connector is securely seated in the device. Try a different power socket to rule out socket issues.
This is generally not expected for devices within the 3A rating. Immediately unplug the cable and device. Check the device's power consumption rating; if it exceeds 3A, this cable is unsuitable. If the device is rated correctly and the cable still overheats, discontinue use and replace the cable.
Setup: Simply plug the UK mains connector into a standard wall socket and the right-angle Figure 8 (C7) connector into the corresponding port on your device. Ensure both connections are firm.
Compatibility: This cable is compatible with any device requiring a Figure 8 (IEC 60320 C7) power input. It is not compatible with devices requiring a C13 (kettle lead) or C5 (cloverleaf) connector. The UK plug is designed for use in the United Kingdom and other regions with compatible sockets.
Care: Keep the cable away from excessive heat and moisture. Clean the connectors and cable periodically with a dry or slightly damp cloth. Avoid sharp bends or kinks in the cable, especially near the connectors, to prolong its lifespan. Ensure the cable is not damaged before use.
