Tetrosyl Stonechip Protection - Grey - 4 Litres

It is designed for metal lower body panels. It is not suitable for synthetic painted surfaces.

One litre covers approximately 8 square metres, providing good coverage for multiple applications.

While not explicitly stated for painting over, it is typically applied as a final protective layer. Check product packaging or contact the manufacturer for specific guidance on overpainting.

Drying times can vary based on temperature and humidity. Always refer to the instructions on the product packaging for specific drying and recoating times.

The main benefit is providing a tough, flexible barrier that protects against corrosion and stone chip damage, while also offering sound deadening qualities.

Yes, it is suitable for lower body panels vulnerable to stone chips, which includes many exposed chassis components.

Clean with standard automotive cleaning products. Avoid harsh abrasives or prolonged high-pressure washing directly on the coating.

Ensure the surface was thoroughly cleaned and degreased before application. Reapply after preparing the affected area by removing loose coating and feathering the edges.

Apply in thinner, more even coats. Ensure the application tool is suitable and used correctly. Allow proper drying time between coats.

Verify the surface is free from contaminants like oil, wax, or old loose paint. Ensure a suitable primer was used if applying to bare metal, and check compatibility with the existing paint.

Calculate the required amount based on the coverage rate (approx. 8 sq m per litre) and the area to be treated. Apply additional coats if necessary, allowing for drying in between.