Best current price£39.70from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£39.70Visit shop Eaton Industries Eaton M22 Usb 3.0 Panel Mount Interface Cable 0.6M - 107412
Visit shop7 offers from £39.70 - £230.35
View price history by clicking the chart icon.
This EATON INDUSTRIES USB 3.0 Type A Bulkhead Interface Cable is designed for professionals needing a robust and reliable front-mounting USB connection in industrial or demanding environments. Its key benefit is providing a secure, protected USB 3.0 port with a permanently attached 1.5-meter cable and a durable titanium bezel. A potential caveat is its specific 9-pole configuration, which must match your system's requirements.
| Model Part Number | 147543 |
|---|---|
| Brand | EATON INDUSTRIES |
An IP65 rating signifies that the product is protected against dust ingress (Category 5) and protected against low-pressure jets of water from any direction (Category 5). This protection is active when the cover is closed.
Yes, USB 3.0 ports and connectors are backward compatible with USB 2.0 devices, though data transfer speeds will be limited to USB 2.0 standards.
The 9-pole configuration refers to the pin layout, which is standard for USB 3.0 and allows for higher data transfer speeds and additional functionalities compared to USB 2.0's 4-pole configuration.
The cable is prefabricated and permanently attached to the bulkhead interface. It is not designed to be user-replaceable.
Refer to the product's technical datasheet for precise dimensions of the required panel cutout for the titanium bezel.
Please consult the official EATON INDUSTRIES documentation or your point of purchase for specific warranty information, as it can vary by region and sales channel.
Verify the USB 3.0 cable is securely connected to both the bulkhead interface and the host device. Check that the 9-pole configuration is correctly implemented if applicable. Test with a different USB device or port to rule out other issues.
Ensure you are connecting to a USB 3.0 port on both ends. Confirm that the connected device also supports USB 3.0 speeds. Check for any obstructions or damage to the cable.
Ensure the protective cover is always closed when no plug is inserted. Inspect the cover seal for any damage and replace if necessary. Clean any debris from the seal area.
Setup: This interface is designed for front-mounting. Ensure you have a suitable cutout in your panel or enclosure that matches the dimensions of the titanium bezel. Secure the unit from the front using appropriate mounting hardware (not included). Connect the USB-A end of the prefabricated cable to your host device or hub. Ensure the cover is closed when not in use to maintain IP65 protection.
Compatibility: The cable uses standard USB 3.0 Type A connectors on both ends, making it compatible with any device or port supporting the USB 3.0 standard. The 9-pole configuration is specific and should be verified against your system requirements for any specialized signaling or power delivery.
Care: To clean the exterior, use a slightly damp, soft cloth. Avoid abrasive cleaners or solvents. Ensure the IP65 protection is maintained by keeping the cover closed when a USB plug is not inserted. Periodically check the cable and connectors for any signs of damage.
