Faithfull Plastic Hose Mender - Multicolor
Best current price£7.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£7.00Visit shop Faithfull Plastic Hose Mender - Multi Colour
Visit shopThe Range£7.00Visit shop All Offers
2 offers from £7.00 - £7.45
View price history by clicking the chart icon.
Product Information
Full details
The Faithfull Plastic Hose Mender is an essential tool for homeowners and gardeners looking for a reliable way to fix damaged sections or join two lengths of garden hose together. It offers the key benefit of creating a strong, watertight seal without the need for specialized tools, though it is exclusively designed for 12.7mm (1/2in) bore hoses, meaning it will not fit larger industrial or smaller specialty tubing.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | 1405071 |
| Brand | Faithfull |
Extended Product Information
FAQs
Will this work on a 3/4 inch hose?
No, this mender is specifically designed for 12.7mm (1/2in) bore hoses only.
Do I need any tools to install it?
No, the Faithfull Hose Mender is designed for tool-free, hand-tightened installation.
Is this suitable for high-pressure power washers?
This mender is intended for standard garden hose water pressure and should not be used on high-pressure pump output lines.
Can I leave this outside during winter?
While made of durable ABS, it is recommended to drain the hose and store connections indoors during freezing temperatures to prevent damage.
What is the three-point fixing system?
It is an internal tension design that grips the hose at three separate points to ensure the hose does not slip and the water remains sealed.
Troubleshooting
Leakage at the connection point
Ensure the hose end is cut straight and that the locking nut is fully tightened to engage the three-point fixing.
Hose pulls out of the mender
Check that you have pushed the hose firmly into the unit before tightening the locking nut; verify the hose diameter is exactly 12.7mm.
Difficult to tighten
Ensure there is no grit or debris inside the threading of the locking nut; rinse with water if necessary.
Pros and Cons
Pros
- Easy to install without tools
- Provides a secure, watertight seal
- Non-slip grip is effective in wet conditions
- Durable ABS plastic construction
Cons
- Limited to 12.7mm (1/2in) bore hoses only
- Not suitable for high-pressure industrial lines
- Material may become brittle if left in extreme direct sun for years
Setup, Compatibility & Care
Setup
- Ensure the hose end is cut cleanly and squarely to ensure a proper fit against the internal seals.
- Slide the locking nut onto the hose.
- Push the hose onto the connector body firmly until it seats completely.
- Tighten the locking nut to engage the three-point fixing system.
Compatibility
This device is exclusively compatible with 12.7mm (1/2in) standard garden hoses. It is not designed for flat-hose or reinforced heavy-duty hoses with thicker walls.
Care
To prolong the life of the mender, avoid driving over it with heavy machinery. If the hose connection becomes stiff over time, a small amount of silicone-based lubricant on the internal O-rings can help maintain the quick-release functionality.