Makita Nylon Cutting Head Assembly - 198385-7
Best current price£27.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£27.99Visit shop B&Q - 198385-7 Nylon Cutting Head Assembly
Visit shopB&Q£27.99Visit shop All Offers
5 offers from £27.99 - £29.85
View price history by clicking the chart icon.
Tooled UpMakita 198385-7 Bump & Feed Cutter Assembly For Line Trimmer
£5.95 delivery
£28.95
Visit shop
Makita 198385-7 Bump & Feed Cutter Assembly For Line Trimmer£5.95 delivery£28.95Visit shop →
Makita 198385-7 Bump & Feed Cutter Assembly For Line Trimmer£5.95 delivery£28.95Visit shop →
eBayGENUINE MAKITA STRIMMER TRIMMER HEAD TAP & GO 198385-7 2.0 mm 1 V New in Pack
Free delivery in 1–3 days
£29.85
Visit shop
Product Information
Full details
The Makita 198385-7 Tap&Go Nylon Cutting Head is designed for landscaping professionals and homeowners using Makita DUR187 or DUR188 string trimmers who prioritize efficiency and noise reduction. Its primary benefit is a specialized four-leaf line design that decreases noise output by 10% and improves energy efficiency by 15%, though users should note it is specifically engineered for select Makita cordless models and may not fit other brands.
All features
| Model Part Number | 198385-7 |
|---|---|
| Brand | Makita |
Extended Product Information
FAQs
Does this head come with line installed?
Yes, it includes 3 meters of 2mm nylon line to get you started immediately.
Can I use this on a gas-powered trimmer?
No, this specific model is designed for use with the Makita DUR187 and DUR188 cordless electric models.
What is the diameter of the line used?
The head is optimized for 2mm diameter nylon cutting line.
How does the Tap&Go feature work?
While the trimmer is running, tap the head gently against the ground; this triggers the internal mechanism to release additional line automatically.
How do I maintain the noise reduction benefit?
To maintain the 10% noise reduction, always use the recommended 2mm four-leaf line profile rather than generic round line.
Troubleshooting
Line fails to advance when tapped
Check if the internal spring is obstructed by debris or if the nylon line has become tangled inside the spool.
Excessive vibration during use
Ensure the head is threaded onto the spindle correctly and that the nylon line is distributed evenly on the spool.
Difficulty unscrewing the head
Use a pair of pliers to hold the locking pin (if your trimmer model includes one) to prevent the shaft from rotating while you unscrew the head.
Pros and Cons
Pros
- Significantly quieter operation than standard heads
- Improved battery runtime due to lower energy draw
- Convenient Tap&Go line advancement
- Durable construction typical of Makita accessories
Cons
- Compatibility limited to specific Makita DUR187 and DUR188 models
- Requires manual spooling once the initial line is depleted
- Not compatible with generic string trimmer brands
Setup, Compatibility & Care
Compatibility: This assembly is exclusively compatible with the Makita `DUR187` and `DUR188` series string trimmers. Always check your model number before installation.
Setup Instructions:
- Ensure the trimmer battery is removed before performing any maintenance.
- Remove the old cutting head by rotating it off the spindle.
- Align the 198385-7 head with the threaded spindle and screw it on firmly by hand.
- Ensure the head is seated securely before reinserting the battery.
Care and Maintenance:
- Inspect the head housing periodically for cracks or excessive wear.
- Keep the head free of debris and matted grass to prevent vibrations.
- When the line runs low, use high-quality 2mm nylon line for replacements to ensure the Tap&Go mechanism continues to function correctly.