Best current price£32.06from eBay
Shopping.co.uk recommended and popular offers
eBay£32.06Visit shop Matte Chrome LED Dimmer Switch 2 Gang 2 Way Double Rotary | Varilight JSP252
Visit shop
The Range£34.82Visit shop Varilight Jsp252 V-Pro 2-Gang 2-Way Push-On/Off Rotary Led Dimmer 2 X 0-120W (1-10 Leds) - Georgian Brass
Visit shop4 offers from £32.06 - £37.46
View price history by clicking the chart icon.
The Varilight V-Pro 2-Gang 2-Way Rotary Dimmer is ideal for homeowners and electricians looking for a sophisticated, British-made lighting control solution that integrates seamlessly with modern LED technology. By utilizing advanced trailing edge dimming, it provides smooth, flicker-free performance for mains and low-voltage spotlights, though users should note it requires a minimum load of 10 watts or two LED lamps to function correctly.
| Colour | Gold |
|---|---|
| Model Part Number | DIM-2BM-2-BM |
| Brand | Varilight |
No, this dimmer is strictly for use with dimmable LED bulbs or mains halogen lamps.
Yes, while it supports 2-way switching, it is fully compatible with standard 1-way lighting circuits.
The maximum load per gang is 100 watts or 10 lamps.
Yes, it is compatible with most mains and low-voltage lighting systems provided they are marked as dimmable.
No, this is a standard 2-wire dimmer switch that installs directly into existing wiring.
Specific configuration steps involve a sequence of switching the power on and off; please refer to the technical installation sheet included in your product packaging for the exact sequence.
Check that you meet the minimum load requirement of 10W or 2 LED bulbs and consider adjusting the minimum brightness setting via the dimmer's configuration mode.
Verify the bulbs are labeled 'dimmable'. If using non-dimmable bulbs, the unit will not operate correctly.
Installation should always be performed by a qualified electrician to ensure compliance with local electrical safety standards. Before installation, confirm that your back box is sufficiently deep to accommodate the switch depth. To maintain the gold finish, clean the faceplate only with a soft, dry cloth; avoid using abrasive chemicals or solvent-based cleaners that may strip the metallic coating. Ensure that your total load per gang does not exceed 100 watts or 10 lamps to stay within the manufacturer's safety specifications.
