Thompsons Emergency Instant Repair Aerosol - Black

You can use this product on a variety of surfaces, including wood, metal, plastic, and masonry. Always test on a small area first.

Drying time depends on the ambient temperature and humidity, but generally, it takes about 30 minutes to an hour for the surface to be dry to the touch. Allow at least 24 hours for full cure.

It is generally not recommended to paint over this product as it is designed to provide a protective seal and a black finish.

Wipe the nozzle with a clean cloth or a piece of wire to remove any dried product. If the nozzle remains clogged, replace it with a new one.

Apply thin, even coats until the crack or hole is completely sealed. Multiple coats may be necessary for deeper damage.

Yes, the product provides a waterproof seal, protecting against water and moisture.

Store the can in a cool, dry place away from direct sunlight and heat. Keep it out of reach of children.

Wipe the nozzle clean and try again. If the issue persists, replace the nozzle.

Ensure the surface is clean, dry, and properly prepared before application. Sand the surface lightly for better adhesion.

Apply thin, even coats, and allow each coat to dry completely before applying the next. Avoid spraying too heavily in one area.

Ensure the crack or hole is completely covered and sealed. Apply multiple coats if necessary, allowing each coat to dry.