Best current price£7.49from eBay
Shopping.co.uk recommended and popular offers
eBay£7.49Visit shop RAPIDE Bond & Fill Expanding Foam Filler 750ml
Visit shop
B&Q£8.79Visit shop B&Q - 1XExpanding Foam Pu Bond And Fill Sealing Insulating Gap Filler Spray 750Ml
Visit shop4 offers from £7.49 - £9.23
View price history by clicking the chart icon.
The Rapide Bond & Fill Expanding Foam Filler is an essential tool for DIY enthusiasts and construction professionals looking to bridge gaps and insulate voids in masonry and structural surfaces. It provides a highly efficient way to seal brick, concrete, plaster, and stone, offering superior heat, sound, and moisture insulation in a single application. While it offers excellent expansion and coverage, users must be mindful that the foam expands significantly during the curing process, requiring precise application to avoid overflow.
| Brand | rapide |
|---|
Yes, it is suitable for exterior use, but the cured foam should be painted or covered to protect it from long-term UV degradation.
While it becomes touch-dry quickly, allow at least 24 hours for the foam to reach its full cured strength before cutting or sanding.
It acts as a moisture barrier, but it is not intended to be used as a primary waterproofing membrane for hydrostatic pressure.
Yes, it is designed for large voids, but for exceptionally deep gaps, apply in multiple layers allowing each to cure.
Wipe off as much as possible immediately with a dry cloth and wash with soap and water. Cured foam must be removed mechanically and will wear off naturally.
Always check the specific fire rating on the canister label, as foam properties vary; it is generally treated as a combustible material.
Ensure the surface is slightly damp and the canister is at room temperature before use.
Apply less material; the foam continues to expand for several minutes after initial application.
Use a specialized foam cleaner solvent or gently clear the tip with a wire, though it is best to avoid clogs by cleaning immediately after use.
Before use, ensure the target surfaces are free from dust, grease, and loose debris to maximize adhesion. It is highly recommended to wear gloves and eye protection, as the foam is difficult to remove from skin and clothing. For optimal curing, lightly misting the application area with water can improve adhesion and the expansion structure of the foam. Once the task is complete, store the canister upright in a cool, dry place. If the nozzle is not empty, use an appropriate solvent-based cleaner to clear the valve immediately to prevent the foam from hardening inside the mechanism.
