CHAUVET Safety Bond - 3mm x 787mm
Best current price£5.95from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£5.95Visit shop Chauvet DJ CLP-03 Standard C Clamp Light Mounting Lighting Truss Mount CLP03
Visit shopeBay£5.95Visit shop One Offer
1 offer from £5.95
View price history by clicking the chart icon.
eBayChauvet DJ CLP-03 Standard C Clamp Light Mounting Lighting Truss Mount CLP03
£4.60 delivery
£5.95
Visit shop
Product Information
Full details
The CHAUVET Safety Bond is an essential safety accessory designed for professional stage technicians, event planners, and venue owners who need to ensure lighting equipment remains securely mounted. Its primary benefit is the prevention of equipment falls during primary mounting failure, providing critical protection for personnel and assets. One caveat to consider is that the 25kg load limit must be strictly observed, meaning it is not suitable for exceptionally heavy motorized fixtures or large-scale arrays without additional support.
All features
| Model Part Number | EUCH-05 |
|---|---|
| Brand | CHAUVET |
Extended Product Information
FAQs
Can I use this for loads heavier than 25kg?
No. The safety bond is rated specifically for a maximum of 25kg. Exceeding this weight can cause the cable to fail during a drop.
Is this bond suitable for outdoor events?
Yes, but steel cables may be susceptible to corrosion if exposed to rain or salt air for extended periods. Inspect regularly for rust.
Does this replace the primary mounting clamp?
No. This is a secondary safety device only. A primary clamp must always be used to secure the fixture to the truss.
Can I link two bonds together to create more length?
It is not recommended, as connecting multiple safety bonds creates multiple failure points and reduces the overall efficacy of the setup.
What should I do if the cable was involved in a drop?
If the cable has been stretched or 'shock loaded' by catching a falling light, you must discard it and use a new one.
Troubleshooting
Carabiner is difficult to open or close
Check for debris in the threads or slight bending of the gate. If threads are damaged, replace the safety bond.
Cable shows signs of kinks or bends
Minor bends are normal with storage, but sharp kinks that compromise the steel strands require the unit to be retired.
Pros and Cons
Pros
- High-tensile 3mm steel construction
- Reliable screw gate carabiner prevents accidental slips
- Generous 787mm length for versatile rigging
- Essential for meeting standard safety protocols
Cons
- Limited to 25kg maximum load capacity
- Steel cable can scratch finish if not handled carefully
- Fixed length may be too long for some tight-fit setups
Setup, Compatibility & Care
To set up the bond, loop the cable through the fixture's secondary safety point and wrap it around the structural truss before securing it with the screw gate carabiner. Ensure the carabiner is fully threaded closed. This bond is compatible with most professional lighting fixtures equipped with a safety eyelet. To maintain the cable, periodically inspect it for fraying, kinks, or signs of rust, especially if used in outdoor or high-humidity environments. If the cable shows any signs of structural damage or deformation, it should be removed from service immediately.