Olympia Power Tools X20S Cordless Grass Trimmer - 20V - 2.0Ah Battery

Refer to the user manual for detailed instructions on how to install the cutting line. Typically, you'll need to thread the line through the trimmer head and secure it in place.

The X20S uses a 20V Olympia Power Tools battery. A 2.0Ah battery is included.

Battery life varies based on the type of grass and the intensity of use. Expect shorter run times with thicker grass or tougher trimming tasks.

The X20S does not have adjustable cutting heights. The cutting height is determined by the design of the trimmer head and the cutting line length.

After each use, remove any grass clippings and debris from the trimmer head and shaft. You can use a damp cloth to wipe down the exterior.

Replacement cutting line is available from Olympia Power Tools retailers or online. Make sure to purchase the correct diameter (0.16cm) for the X20S.

Refer to the product documentation or contact Olympia Power Tools for warranty information.

Check that the battery is properly inserted and charged. Ensure the safety switch is engaged.

Check the cutting line and replace if worn. Ensure the head is positioned correctly for the desired cut.

Check for any obstructions in the cutting head. Ensure the cutting line is properly installed and not tangled.