Best current price£6.58from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£6.58Visit shop HENGST FILTER Oil filter OPEL,FORD,HYUNDAI H13W01 05740004,1275229C2,1627132090 Engine oil filter 1959198C1,1962769C2,1146934,3I1154,3I1603,9Y4494
Visit shop12 offers from £6.58 - £18.44
View price history by clicking the chart icon.
This guide is for vehicle owners seeking a reliable engine oil filter for specific Hyundai and other compatible models. The Hella Engine Oil Filter H13W01 offers OE-quality manufacturing for consistent performance and protection. A key caveat is the critical need to verify fitment and dimensions against your vehicle's specifications before purchase, as variations exist.
| Model Part Number | H13W01 |
|---|---|
| Brand | Hella |
This filter is primarily designed for specific Hyundai models, including the Accent IV (RB) Hatchback and Saloon (2010-2018) with 1.4L or 1.6L engines, and various Hyundai Pony models (1977-1995). It is essential to verify your vehicle's exact specifications and compare measurements, as variations exist.
It is recommended to replace the oil filter during every oil change, following your vehicle manufacturer's recommended service intervals. Typically, this is every 5,000 to 10,000 miles, or as indicated in your owner's manual.
OE-quality standards means the filter is manufactured to meet or exceed the quality, performance, and specifications set by the original vehicle manufacturer for their factory-installed parts.
No, it is strongly advised not to use this filter if your vehicle is not explicitly listed or if the dimensions and specifications do not match. Using an incorrect filter can lead to engine damage.
The H13W01 filter has an outer diameter of 84mm, a thread size of M20x1.5-6H, and a height of 77mm. It is a spin-on type filter.
The product information lists several OEM cross-reference numbers, including FORD: 3 252 742, 5 021 023, E 7 GZ 6731 A, 5 012 574, E 92 Z 6731 A, and HONDA: 13400-PH1d.
Ensure the old filter gasket was completely removed and not doubled up. Verify the new filter is screwed on correctly and the gasket is properly seated and lubricated. Check that the filter is the correct part number for your vehicle.
Ensure you are using the correct filter for your vehicle and that the filter mounting surface on the engine is clean. Check for any obstructions or damage to the threads on the engine block.
After installation and starting the engine, allow a few minutes for the new filter to fill with oil and oil pressure to build. If the light persists, re-check the oil level and filter installation. Consult a mechanic if issues continue.
Compatibility Verification: Before purchasing, it is crucial to cross-reference the Hella Oil Filter Part Number H13W01 with your vehicle's make, model, year, and engine specifications. Pay close attention to any 'IMPORTANT: Check measurements & dimensions' notes provided. This filter is specifically designed for certain Hyundai models, including variations of the Accent IV and Pony series, as well as compatible models listed by OEM cross-references.
Installation: Installation is a standard spin-on filter process. Ensure the engine is cool. Lubricate the rubber gasket on the new filter with a thin layer of clean engine oil. Screw the filter on by hand until the gasket makes contact, then tighten an additional 3/4 to one full turn, or as recommended by the vehicle manufacturer. Do not overtighten.
Care: Oil filters are designed for single use and should be replaced at recommended service intervals, typically during an oil change. Dispose of used filters responsibly according to local regulations.
