Hansgrohe Vernis Blend EcoSmart Shower Kit - Chrome

EcoSmart technology is Hansgrohe's innovative system designed to reduce water consumption by up to 40% without compromising on user experience. It achieves this by limiting the flow rate and optimizing the mixing of water with air.

You can switch between the 'Rain' and 'IntenseRain' spray modes by simply rotating the spray disc on the shower head until your desired mode is selected.

This shower kit is designed for high-pressure systems and performs best with a minimum operating pressure of 1.0 bar. The maximum recommended operating pressure is 10.0 bar.

The shower head features QuickClean nozzles. After showering, simply rub these silicone nubs gently with your finger or a dry cloth to dislodge any limescale. For stubborn buildup, a mild vinegar solution can be used, followed by rinsing.

The shower hose is a fixed 1.6 meters in length, providing ample reach. The shower head itself can be adjusted in height and angle along the shower bar.

The Hansgrohe Vernis Blend EcoSmart Shower Kit is backed by Hansgrohe's five-year manufacturer's warranty, covering defects in materials and workmanship.

This kit is optimized for high-pressure systems (above 1.0 bar). While it may function in lower pressure systems, the flow and performance of the spray modes may be significantly reduced.

Check that the water pressure is above 1.0 bar. Ensure the QuickClean nozzles are free from limescale by rubbing them gently. Verify that the shower hose is not kinked or blocked.

Ensure the spray disc is rotated firmly to switch between 'Rain' and 'IntenseRain' modes. If stiff, clean around the disc with a damp cloth.

Tighten the shower hose connections at both the shower head and the valve. Check that any washers or seals are correctly seated and undamaged. If leaks persist, contact a qualified plumber.

Ensure the mounting brackets are securely fastened to the wall. Check that the wall anchors are appropriate for your wall type and are firmly embedded.