Outwell Superior Double Airbed - Built-in Pump
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Outwell Superior Double Airbed is designed for campers seeking enhanced comfort and ease of use. Its key benefit is the integrated electric pump for quick inflation and a raised design for better insulation and easier access. A potential caveat is the reliance on a power source for inflation.
All features
| Model Part Number | 003977994 |
|---|---|
| Brand | Outwell |
Extended Product Information
FAQs
How long does it take to inflate?
Inflation typically takes only a few minutes, depending on the desired firmness. Deflation is also a quick process.
Can this airbed be used outdoors?
Yes, it can be used outdoors, but it's recommended to place it on a groundsheet or protective layer to prevent punctures from sharp objects on the ground.
What is the maximum weight capacity?
The airbed has a maximum load capacity of 300 kg.
Is the built-in pump suitable for deflating too?
The pump has a setting for deflation to help remove air quickly, making packing easier.
What is the material of the top surface?
The top surface is made of a soft rayon with a velour touch for enhanced comfort.
How should I clean the airbed?
Clean the airbed with a damp cloth and mild soap. Avoid harsh chemicals and ensure it is completely dry before storing.
What are the dimensions when inflated?
The inflated dimensions are 195 cm in length, 160 cm in width, and 45 cm in height.
Troubleshooting
Airbed not inflating
Check that the airbed is plugged into a functioning 230V power source. Ensure the double seal valve is fully open and the pump is switched on. Verify there are no obstructions in the pump intake or valve.
Airbed losing air overnight
Ensure the double seal valve is securely closed after inflation. Check for any small punctures or tears in the PVC material. If a puncture is found, use a suitable repair kit for PVC airbeds.
Pump making unusual noise
Turn off and unplug the pump. Check for any debris lodged in the pump mechanism or valve area. Ensure the airbed is not over-inflated, which can strain the pump.
Difficulty deflating
Make sure the double seal valve is completely open. Gently press and fold the airbed from the opposite end of the valve to help push out the air. Ensure the pump is set to deflate, if applicable.
Pros and Cons
Pros
- Effortless inflation and deflation with the built-in electric pump.
- Excellent comfort and insulation due to the raised design and height.
- Stable and supportive sleeping surface suitable for two people.
- Soft velour top enhances the sleeping experience.
- Convenient all-in-one solution with a built-in pillow.
Cons
- Requires a 230V power source for the built-in pump.
- The PVC base may be susceptible to punctures from sharp objects.
- Deflation might take a few minutes to completely empty the air.
- Velour top can be slower to dry if it gets wet.
Setup, Compatibility & Care
Setup:
- Ensure the airbed is placed on a clean, flat surface, free from sharp objects. Use a groundsheet for added protection.
- Locate the power plug for the built-in pump. Ensure you have a suitable 230V power source available (e.g., mains power at a campsite or via an inverter).
- Open the double seal valve completely.
- Plug in the pump and switch it on. The airbed will inflate automatically. Monitor the inflation to avoid over-inflation.
- Once inflated to your desired firmness, switch off the pump and securely close the double seal valve.
Deflation:
- Open the double seal valve.
- Turn the pump to its deflate setting (if applicable) or simply allow the air to escape through the open valve.
- Gently press down on the airbed to help expel remaining air.
- Once deflated, fold the airbed neatly and place it in the provided carrybag.
Compatibility:
- Power: Requires a 230V power outlet.
- Ground: Best used on a level surface; avoid rough or sharp terrain without protection.
Care:
- Clean the surface with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners.
- Ensure the airbed is completely dry before storing to prevent mold or mildew.
- Store in the carrybag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Periodically check the valve and pump for any debris or damage.