Trek Checkpoint+ SL 7 AXS Electric Gravel Bike - Green

The TQ 360Wh battery range varies significantly based on terrain, rider weight, assist level, and riding style. Under optimal conditions, expect assistance for rides extending well over 50 miles, with potential for much longer rides using lower assist levels or the standard pedaling effort.

The TQ HPR60 motor is designed for low maintenance. Keep it clean and free from excessive dirt or mud. Avoid using high-pressure washers directly on the motor housing. For any internal issues, consult a qualified Trek dealer.

The frame and fork are designed to accommodate tires up to 700x42 mm. While wider tires might physically fit, it's recommended to stay within this limit to ensure adequate mud clearance and proper tire seating on the rims.

Trek offers a limited lifetime warranty on its OCLV Carbon frames and rear suspension linkages. Other components, including the TQ motor and battery, typically carry a manufacturer's warranty of two years. Please refer to the official Trek warranty documentation for specifics.

The fork can be adjusted using its Solo Air spring for rider sag and the Rebound dial to control the speed at which the fork extends after compression. Consult the Rock Shox documentation for detailed instructions on setting sag and rebound.

The SRAM AXS E1 system is designed to work seamlessly within the AXS ecosystem. While AXS components are generally cross-compatible within their generation, it's always best to consult SRAM's official compatibility charts for specific pairings.

Yes, the bike's versatility, integrated mounts for fenders, and the electric assist make it a capable commuter, especially for longer or hillier routes. However, its primary design is for off-road adventures.

Ensure the battery is charged and properly seated. Check the TQ LED display for error codes. Verify that the bike's speed sensor is clean and properly aligned. Consult the TQ system manual or a Trek dealer if the issue persists.

Check battery levels in the AXS shifters and derailleur. Re-pair the shifters with the derailleur via the SRAM AXS app or by holding the AXS button. Ensure the derailleur hanger is straight. Clean the derailleur's clutch mechanism.

Attempt to restart the display by holding the power button. Ensure the display is securely connected. If using a smartphone app, ensure Bluetooth is enabled and the app is updated. Check the TQ system manual for reset procedures.

Check the valve core for tightness. Add more tubeless sealant if the leak is persistent. Inspect the rim tape for damage or improper installation. Ensure the tire bead is properly seated on the rim.

Clean the rotors and brake pads with isopropyl alcohol. Inspect pads for wear and replace if necessary. Ensure rotors are true and free of bends. Bed in new brake pads according to manufacturer instructions.