Raceline Steel Gear Pedal For Yamaha YZ125 1996-2004 YZ250 1989-2004 - GP310

This Raceline Steel Gear Pedal (GP310) is compatible with Yamaha YZ125 models from 1996 to 2004 and Yamaha YZ250 models from 1989 to 2004.

Yes, it is designed as a direct replacement for the original gear pedal on the specified Yamaha models, requiring no modifications for installation.

The full steel construction provides significantly enhanced durability and strength compared to stock or some other materials, making it more resistant to bending or breaking during impacts.

Typically, you will reuse the original mounting bolt and nut. Ensure you have these available. Any specific additional hardware would be noted in the product packaging, but it's designed for use with existing mounting points.

Clean the pedal with a damp cloth and mild soap. Avoid harsh chemicals. Periodically check the pivot bolt and lubricate the pivot for smooth operation.

The spring-loaded tip is designed to help protect the pedal and transmission linkage from damage during impacts by allowing the pedal to fold slightly and return to position. It contributes to the pedal's overall resilience.

While primarily focused on durability and reliability, a properly functioning and securely mounted gear pedal ensures consistent engagement, which can contribute to reliable shifting. It does not offer electronic or hydraulic shifting assistance.

Check that the pivot bolt is not overtightened. Ensure the pedal is clean and free of debris. Apply a small amount of lubricant to the pivot point.

Verify the pedal is correctly aligned with the shift shaft and that it pivots freely. Ensure no part of the pedal is binding against the engine case or frame. Re-check installation steps.

Inspect the spring mechanism for damage or debris. Ensure it is properly seated. If the spring is damaged, replacement may be necessary.