Best current price£24.67from The Range
Shopping.co.uk recommended and popular offers
The Range£24.67Visit shop Thunderbolt All-Purpose Anchors Hexagon Head Galvanised - M10 X 60 (Box Of 50) - White
Visit shop31 offers from £24.67 - £71.54
View price history by clicking the chart icon.
The Thunderbolt All-Purpose Anchors (M10 X 60, Silver) are designed for DIY enthusiasts and professionals seeking a strong, versatile anchoring solution. Their key benefit lies in reliable performance across concrete, brick, and block materials, aided by a hexagon head for easy installation and a galvanised finish for durability. A minor caveat to consider is their specific size (M10 x 60), which may not suit all applications requiring different dimensions.
| Colour | Silver |
|---|---|
| Model Part Number | M10 X 60 |
| Brand | Thunderbolt |
These anchors are designed for general-purpose fixing in concrete, brick, and block. They are suitable for medium-duty applications like mounting shelves, brackets, or fixtures.
Yes, the galvanised finish provides corrosion resistance, making them suitable for many outdoor applications. However, avoid prolonged exposure to harsh, highly corrosive environments.
You will need to consult the specific product packaging or manufacturer's recommendations for the precise drill bit size required, as it depends on the substrate material. Typically, it will be slightly larger than the anchor's nominal diameter.
These are general-purpose anchors for medium-duty tasks. For heavy-duty applications, consulting with a structural engineer or using specialized anchors designed for higher load capacities is recommended.
Removing anchors can be challenging. Often, they are cut flush with the surface, or a specialized anchor removal tool might be employed. The method depends on the anchor type and how deeply it is set.
M10 refers to the metric thread size (diameter), and 60 refers to the length of the anchor in millimeters.
Ensure the drilled hole is clean and of the correct diameter. Verify that the anchor is fully seated in the material before tightening. If the material is soft or crumbly, a different type of anchor may be required.
Check that the correct size wrench or socket is being used. Ensure the anchor is not cross-threaded and is moving freely before full tightening. Remove and re-inspect the hole and anchor for any obstructions or damage.
Minor surface rust on the galvanised finish is normal over time. For significant corrosion, the anchor may be compromised and should be replaced. Ensure the anchor is suitable for the environmental conditions.
Setup:
Compatibility:
Care:
