Shopping.co.uk

Granville 0W/30 FS-FX Engine Oil - 5 Litre

Granville 0W/30 FS-FX Engine Oil - 5 Litre

Granville FS-FX 0W/30 is a fully synthetic Mid SAPS engine oil specifically formulated to meet the...

Best current price£37.81from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

11 offers from £37.81 - £153.36

View price history by clicking the chart icon.

eBayGranville - FS-FX 0W-30 Fully Synthetic Engine Oil 5L
Free delivery in 1–3 days
£37.81
Visit shop
B&QB&Q - 0W/30 Fs-Fx Fully Synthetic Engine Oil 5 Litre For Mid Saps Acea C2
Free delivery in 1–3 days
£43.09
Visit shop

Product Information

Full details

The Granville 0W/30 FS-FX engine oil is a high-performance, fully synthetic lubricant designed primarily for modern Ford Dura Torq engines produced from 2014 onwards. It is an ideal choice for vehicle owners and mechanics seeking a Mid SAPS formula that supports emission control systems, though users must verify their vehicle manual's specific viscosity and manufacturer approval requirements before application to ensure engine compatibility.

All features

Model Part Number0866
BrandGranville

Extended Product Information

FAQs

Can I use this oil in an older car?

This oil is specifically formulated for modern engines (2014>). Using it in older engines not designed for low-viscosity, Mid SAPS oils may result in improper lubrication.

Is this oil suitable for petrol engines?

While primarily focused on diesel Duratorq engines, it covers specific standards like Fiat 9.55535-GS1 which apply to petrol engines. Always check your handbook.

What does Mid SAPS mean?

It refers to the levels of Sulfated Ash, Phosphorus, and Sulfur. Lower levels are required to prevent clogging of Diesel Particulate Filters (DPF).

How often should I change this oil?

Always follow the service interval recommended by your vehicle manufacturer, which can usually be found in your service book.

Can I mix this with other brands?

Mixing oils is not recommended. For best performance, perform a full oil change using a single compatible product.

Troubleshooting

Oil pressure warning light remains on after change

Verify that the correct amount of oil was added and ensure the oil filter is tightened correctly. Check for leaks around the filter seal.

Engine feels sluggish or noisy

Check the oil dipstick to ensure the level is between the minimum and maximum marks. If the level is correct, check if the oil specification matches the requirements of your specific engine model.

Pros and Cons

Pros

  • Protects sensitive emission control systems like DPFs
  • Optimized for modern Ford Duratorq engines
  • High-quality synthetic base provides excellent wear protection
  • Meets rigorous BMW LL-12 FE and Ford WSS-M2C950-A standards

Cons

  • Not suitable for older engines requiring higher viscosity oils
  • Must be checked against specific manufacturer service manuals
  • May not be compatible with all engines from the listed manufacturers

Setup, Compatibility & Care

Before adding the oil, always consult your vehicle's owner manual to confirm that the engine requires an ACEA C2 rated 0W/30 oil.

  1. Ensure the engine is switched off and cool enough to work on safely.
  2. Locate the oil filler cap on top of the engine and the oil sump plug underneath.
  3. Drain the old oil into a suitable container and replace the oil filter.
  4. Refit the sump plug with a new washer.
  5. Pour the required amount of Granville 0W/30 into the filler port, checking the dipstick level as you proceed to avoid overfilling.
  6. Dispose of the used engine oil at a certified local recycling facility or hazardous waste center.

Price History

DatePrice
Visit shop