Best current price£76.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£76.99Visit shop B&Q - Woodworm Treatment & Rot Sprayer Kit 2 X 5 LitresReady For Use & Solvent-Free Woodworm Killer
Visit shop4 offers from £76.99 - £79.99
View price history by clicking the chart icon.
This guide helps you understand and effectively use the Soluguard Woodworm & Rot Sprayer Kit (2 x 5 Litres). Designed for both amateur and professional use, this kit protects wooden structures from woodworm and wood-rotting fungi. The main caveat is that serious infestations and dry rot require professional treatment. This guide covers setup, best practices, and troubleshooting to help you get the most out of your Soluguard kit.
| Model Part Number | AM-SOLDUAL SPR 2 |
|---|---|
| Brand | Soluguard |
You can apply it by brush or spray. For spray application, use the Festa 7 pump-up sprayer included in the kit. For smaller items, dipping the wood is also an option.
No, this product is intended for application to unpainted, unvarnished timber. You must remove any existing paint or varnish before application.
Always wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a mask. Work in a well-ventilated area and avoid inhaling the spray.
Drying times vary depending on environmental conditions. Allow the treated wood to dry completely before handling or applying any further treatments.
Yes, it can be used on exterior wood, but it should not be used on wood in ground contact.
Serious woodworm infestations or any timber decay caused by dry rot should be dealt with by a professional timber treatment company. Contact a specialist.
Coverage depends on the wood type and the application method. Consult the product label for specific coverage details.
If you need a professional, fill out the contractor enquiry form provided to find suitable companies in your area.
Check if the sprayer is properly primed. Make sure the nozzle is not clogged and the tank is correctly pressurized. Refer to the sprayer's manual for specific instructions.
Ensure the wood surface is clean and free from any coatings (paint, varnish). Reapply the treatment and allow it to penetrate the wood. Check for any obstructions to the wood's surface.
Ensure adequate ventilation during and after application. The product has low odor but proper ventilation will reduce it further. Wait for the treatment to completely dry.
