Metpost Bolt Grip Post Support Bolt Down - 100mm - Grey

Name: Metpost Bolt Grip Post Support Bolt Down - 100mm - Grey
Brand: Metpost
SKU: crdsbxeuab
Price: 18.61 GBP
Availability: InStock

The Metpost Bolt Grip Post Support is designed for securing fence or structural posts onto a concr...

Best current price£18.61from Travis Perkins

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Travis Perkins£18.61Visit shop

Bolt Grip Post Support Bolt Down 100mm

Visit shop

One Offer

1 offer from £18.61

View price history by clicking the chart icon.

Travis PerkinsBolt Grip Post Support Bolt Down 100mm

£30.00 delivery

£18.61

Visit shop

Product Information

Full details

The Metpost Bolt Grip Post Support is an essential hardware solution for DIYers and contractors looking to secure fence or structural posts onto existing concrete bases. Its primary benefit is a robust twin-bolt mechanism that provides a rock-solid grip while elevating the timber to prevent rot, though users should note it is designed specifically for solid surfaces and is not suitable for direct soil installation.

All features

Colour	Grey
Model Part Number	1041
Brand	Metpost

Extended Product Information

FAQs

Can I use this for a gate post?

While it can support many structures, heavy-duty gate posts may require a more specialized heavy-duty socket depending on the weight and movement of the gate.

Is this support rust-proof?

It features a grey oxide finish for weather resistance, but it is not stainless steel; periodic maintenance or painting will prolong its life.

What size bolts do I need for the base?

You will need high-quality masonry anchors (such as sleeve anchors or expansion bolts) appropriate for your concrete thickness.

Can I paint the Metpost?

Yes, once installed, the grey finish provides an excellent base for exterior-grade metal paints.

What if my post is slightly smaller than 100mm?

The bolt grip system is designed to clamp down; however, for a very loose fit, you may need to use small timber shims to ensure the post remains centered.

Troubleshooting

Post feels loose after installation

Check that the twin bolts are tightened equally and that the timber post is not shrinking away from the bracket.

Support plate wobbles on the concrete

Ensure the concrete surface is perfectly level. If uneven, use metal shims under the base plate before tightening the floor anchors.

Pros and Cons

Pros

Easy installation on existing concrete surfaces
Post can be removed or replaced without digging
Protects timber bases from moisture and rot
Heavy-duty construction for reliable structural support

Cons

Requires a pre-existing level concrete base
Not suitable for use in soft ground or soil
Requires masonry fixings for the base (not included)

Setup, Compatibility & Care

Setup: 1. Position the Metpost support on the concrete and mark the hole locations. 2. Drill appropriate holes into the concrete to accommodate your masonry anchors. 3. Bolt the base down firmly. 4. Insert the timber post and tighten the side bolts until the post is locked securely.

Compatibility: This model is specifically sized for 100mm posts. Ensure the timber is planed or adjusted if it varies significantly from the nominal size.

Care: Periodically check the twin bolts for tightness, especially after extreme weather events. Inspect the base for any signs of surface rust and touch up with exterior metal paint as needed to maintain the protective seal.