Colour Forge Wolfkin Grey Spray Primer - Grey - 500ml

While the primer provides a durable base, it is recommended to seal your finished model with a varnish once painting is complete for maximum protection.

Yes, this primer works very well on resin and PLA prints, provided the models have been properly cleaned and cured before spraying.

Allow the primer to cure for at least 30 to 60 minutes in a well-ventilated area before applying your first layer of paint.

It is designed to work with all standard acrylic hobby paints, including those from brands like Citadel, Vallejo, and Army Painter.

Room temperature (approx. 20°C / 68°F) is ideal. Avoid spraying in extreme heat, cold, or high humidity.

The 500ml size is designed to provide better value and more consistent pressure throughout the life of the can, especially useful for large army painting projects.

This is typically caused by spraying from too far away or in temperatures that are too cold/humid. Move closer, shake the can longer, and spray in a climate-controlled environment.

Soak the nozzle in a small amount of isopropyl alcohol or brush cleaner for 10 minutes, then clear it with a thin needle or compressed air.

You are spraying too close or applying too much paint at once. Use shorter, lighter bursts and maintain a consistent 12-inch distance.